Starfire glass scratches

Jeffkstkrt

Community Member
View Badges
Joined
Oct 25, 2020
Messages
60
Reaction score
31
Location
Dallas, GA
What state or country do you live in
Georgia
Rating - 0%
0   0   0
So I was cleaning w my magfloat....and ‘somehow’ something got under the OUTER magnet causing a few scratches.

Has anyone ever tried buffing the scratches out of the glass with some of those wet buffing wheels ??
 
So I was cleaning w my magfloat....and ‘somehow’ something got under the OUTER magnet causing a few scratches.

Has anyone ever tried buffing the scratches out of the glass with some of those wet buffing wheels ??
Likely particles of sand. Very fine 800 grit sandpaper should work , but unless it is an eye sore, Id let it go until the day comes when you need to empty the tank
 
Have you tried the Mr. Clean Magic Erasers? thin strips between the mag float can help buff the glass out.
 
If it not an eye sore, let it be. I have seen a local reefer trying to get scratches out of a waterbox and he messed it up pretty bad.
 
I am getting ready to set up my small cube again. It had a fairly large scratch on front. With water not very noticeable but it bothered me.

I searched and tried a kit from glass polish xnet.

I bought a few extras from the base kit including the coarse pads.

Since it was my first time trying I did not use the coarse pad. Although it probably would have made all go faster. I probably have 3-4 hours into the project.

But I can attest that it can be done. I used the pad to sand scratch out yesterday, stepped up a pad, sanded and then buffed/polished it today.

It’s basically like rubbing paint out on a car. But a but slower.

5704ABDE-F2DA-4CF0-BAED-21E192B9C35E.jpeg
D796CF7E-19AA-4E18-957A-90846174ED1F.jpeg
4B2CEFF0-01AC-47C3-BB14-664FC401BF40.jpeg
 
Last edited:
That is great. Time to try to remove one scratch from mine. Thanks a lot
 
As an eBay Associate we earn from qualifying purchases.
yes... If you have large or deep scratch you may want to include the coarse disk. I ordered extras. However the kit would have been enough for the scratch I removed...


-Ed
 
yes... If you have large or deep scratch you may want to include the coarse disk. I ordered extras. However the kit would have been enough for the scratch I removed...


-Ed
Thanks !! Going to try it out
 
Crap, I found another scratch... Now I want to fix this one also before putting water in... Its on opposite side of front glass. If I don't fix I know I will regret... good thing I bought extra pads
 
I finally got started on the other scratch i found
This time i started with the coarse disk. It definetly took the scratch out faster. But... i gave myself a bit more work, if you use the coarser disk it is very important to hold the disk fairly flat. Also you may not want to press as hard. I had to work out a couple of the coarser scratches that came from the disk. Since i had plenty of the 60 grit disks i spent more time in the prepolish sanding. I also was more liberal with the use of the buffing compound. I am approaching 4 hours again. This area had a long scratch, along with a short deeper scratch. I think if i was a bit more carefull i could have knocked off some time.

When finished i will post a couple photos.




Hope this helps...
 
Hard to show because I did not get a good picture of the scratch before I started. However it came out very good. It just takes time.
 

Attachments

  • 5555D6D5-7E4E-4FD9-963B-7160934C3C0E.jpeg
    5555D6D5-7E4E-4FD9-963B-7160934C3C0E.jpeg
    112.3 KB · Views: 43
  • 215D4411-68DE-4692-9DEB-81363CD51E5C.jpeg
    215D4411-68DE-4692-9DEB-81363CD51E5C.jpeg
    116 KB · Views: 37
  • 38810289-8FBC-4FD0-A5AF-3CCE67157756.jpeg
    38810289-8FBC-4FD0-A5AF-3CCE67157756.jpeg
    106 KB · Views: 35
  • 61841526-B62B-406F-8733-51BF95D9A6FA.jpeg
    61841526-B62B-406F-8733-51BF95D9A6FA.jpeg
    112.3 KB · Views: 37
  • 0E58CA82-577F-4A02-A485-70D9BD12FA8E.jpeg
    0E58CA82-577F-4A02-A485-70D9BD12FA8E.jpeg
    152 KB · Views: 41
I found a pic of the large scratch when I started/ there was also a 1” long deep scratch next to it.
 

Attachments

  • D2095965-7785-4E90-880A-FA4E3CD6D189.jpeg
    D2095965-7785-4E90-880A-FA4E3CD6D189.jpeg
    115.7 KB · Views: 47

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 32 45.7%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 12.9%
  • No.

    Votes: 26 37.1%
  • Other (please explain).

    Votes: 3 4.3%

New Posts

Back
Top