- Joined
- Jun 29, 2017
- Messages
- 115
- Reaction score
- 38
- What state or country do you live in
- Connecticut
Tanks
#1 3/4 inch rimless 75
#2 Cad Lights 34 AIO
#3&4 In the future a nuvo 20 or 10 for qt of coral and observation of fish (or breeding rooms) since clowns like to get down
So to start I've been on and off again in the reefing hobby over the last few years and this time no matter what obstacle life throws at me my passion for reefing will not fade
The 75 is still in the planning and put together phase how ever
The Game plan for the 75 is to do a premium clown harem with 13-15 different morphs and 8 or 9 different bubble tip nems
Ill probably need help determining the best skimmer for a heavy load I plan on heavy feedings to keep aggression down
As far as wave makers go I have 2 out of the 3 current power heads 1 small one (660gph) to go smack dab on the middle overflow and 2 of the 1050's one for each end of the tank
I'm open to suggestions on return pumps I was looking at the current loop since I picked up the wave maker the only drawback I can see is the lack of feed mode the return just dials back to 30% also considering a jebao dct 6500 I'm just noit to sure if the motors are trust worthy
I'm sure there's a lot I'm over looking or forgetting to mention such as lights reactors controllers but I'm not at that step yet
Any advice or recommendations are appreciated
#1 3/4 inch rimless 75
#2 Cad Lights 34 AIO
#3&4 In the future a nuvo 20 or 10 for qt of coral and observation of fish (or breeding rooms) since clowns like to get down
So to start I've been on and off again in the reefing hobby over the last few years and this time no matter what obstacle life throws at me my passion for reefing will not fade
The 75 is still in the planning and put together phase how ever
The Game plan for the 75 is to do a premium clown harem with 13-15 different morphs and 8 or 9 different bubble tip nems
Ill probably need help determining the best skimmer for a heavy load I plan on heavy feedings to keep aggression down
As far as wave makers go I have 2 out of the 3 current power heads 1 small one (660gph) to go smack dab on the middle overflow and 2 of the 1050's one for each end of the tank
I'm open to suggestions on return pumps I was looking at the current loop since I picked up the wave maker the only drawback I can see is the lack of feed mode the return just dials back to 30% also considering a jebao dct 6500 I'm just noit to sure if the motors are trust worthy
I'm sure there's a lot I'm over looking or forgetting to mention such as lights reactors controllers but I'm not at that step yet
Any advice or recommendations are appreciated

