Steves LEDs with Hurricane X

[Beaker00]

Hello all. Having some issues trying to figure out the Hurricane X controller… I’m sure it is simply user error. How do I program it to shut down completely? My best efforts have only resulted in my desired white light length of on time followed by endless blue light until the process continues. Unlike the white light settings, the blue light does not seem to have an “off” time. Ideally, I would like a couple of hours of blue, then white before going back to blue… then completely off.
Any insights are much appreciated!

 

[oreo54]

Hello all. Having some issues trying to figure out the Hurricane X controller… I’m sure it is simply user error. How do I program it to shut down completely? My best efforts have only resulted in my desired white light length of on time followed by endless blue light until the process continues. Unlike the white light settings, the blue light does not seem to have an “off” time. Ideally, I would like a couple of hours of blue, then white before going back to blue… then completely off.
Any insights are much appreciated!

See pg 4. I suspect you need to set "night" pwm to zero on both channels..

https://www.stevesleds.com/assets/images/hurricanex/hurricanex472017.pdf

Set PWM (Night). If you don’t want moonlighting at night, just set CH1, 2, 3, and 4 to
“00.” We will be setting the moonlight to “30” for CH1 (the blue channel in this
example) and CH2, 3 and 4 to “00” (off). Short press and then Long Press to save
settings and back out of the Set PWM (Day) settings.