StikHeds 122 gal rimless w/ custom sump

Subscribed! Like the sump. Is it going to have a fuge? The smoked gray is awesome. Even when it gets a little dirty, it will still look clean. LOL
 
Subscribed! Like the sump. Is it going to have a fuge? The smoked gray is awesome. Even when it gets a little dirty, it will still look clean. LOL
Sorry, I didn't see this earlier. No the sump won't have a fuge in it. I will be running a zeovit system on this tank! Thanks, I love the sump. Once I get the light in it, it's gonna pop.
 
Last edited:
Well, today I decided I would do a little plumbing on the tank. I got the holes for the drains cut, the return line complete. I think it looks pretty slick the way I used the bulkhead for the return line. My goal is to keep the open holes to the back to a minimum.

Heres the gate valve for the full siphon drain and the 3 holes for the drains into the sump. I am coming into the sump horizontally so that I don't see any drain lines in the stand! :cool:
IMG_3055.JPG

IMG_3062.JPG

So here is where I start plumbing the return line, drill a hole for the bulkhead!
IMG_3057.JPG


Glue bulkhead and barb fitting together.
IMG_3056.JPG


Place bulkhead!
IMG_3058.JPG


Attach return line! :cool:

IMG_3059.JPG


And here is the back of the stand and tank!
IMG_3060.JPG
IMG_3061.JPG
 
So I went ahead and added the street 90's from the bulkheads turned down into the sump. Went with black to keep them as hidden as possible! :cool:
image.jpg
image.jpg


image.jpg

image.jpg
 
I got bored so I went ahead and put together the bean animal drains, I will clip the RO line once the tank is running and I have a chance to see the emergency drain water height.
image.jpg


Sorry that's sideways, uploaded from my phone.
image.jpg
 
Today I ordered my Vertex RX-Z 1.5 L Zeovit reactor, my 2 Eheim Jager Heaters 250W, The I/O breakout box for the float switches to connect to the Apex and I also ordered the Stunner Strip for the Sump. I can't wait, things are coming together nicely. I am still waiting on my skimmer to arrive, it was on backorder and should be shipping out sometime here in the near future. I need it so I can get the control module mounted for it and my return pump.
 
Can you pm me his contact info please! What made you choose the Pacific Sun fixture over the ATI?
Well Pacific Sun is a way better fixture than ATI is by far. More channels so you have better control of your light output, on board computer so all channels are operated by the fixture and not an external controller like ATI is, 1 plug in versus 2 like the ATI, integrated moon light with automatic moon phase cycle. Easy to use computer software with Bluetooth connectivity. The pacific sun fixture costs more but to me it's a much better fixture and worth every penny!
 
Well Pacific Sun is a way better fixture than ATI is by far. More channels so you have better control of your light output, on board computer so all channels are operated by the fixture and not an external controller like ATI is, 1 plug in versus 2 like the ATI, integrated moon light with automatic moon phase cycle. Easy to use computer software with Bluetooth connectivity. The pacific sun fixture costs more but to me it's a much better fixture and worth every penny!


Thanks StikhrdRon, very informative! I have been researching lighting for a couple months and have yet to pull the trigger! I've never had a more difficult decision! What did your fixture cost and where did you purchase?
 
I bought it from Pacificsunusa.com, the price was $975 with free shipping, free bulbs and free hanging kit. So with the 10 bulbs at 22 a piece the fixture only cost $755, not much more than ATI Just email them and Yorgos will get back to you pretty quickly.
 
I bought it from Pacificsunusa.com, the price was $975 with free shipping, free bulbs and free hanging kit. So with the 10 bulbs at 22 a piece the fixture only cost $755, not much more than ATI Just email them and Yorgos will get back to you pretty quickly.


Great thanks! What made you choose T-5's over LED?
 
I'm not completely sold on the LED thing for me to use them over my tank that will be all SPS. I tried LED's a few years back and wasn't happy with them so I switched to Metal Halides and T5's and was really happy. But the heat, oh man.. So I went to T5's over my grow out tank that is currently running and I love them so I'm just staying with the tried and true bulbs!
 
Last edited:
Well today was delivery day, got a few things from UPS and had to get them installed. Here is the Avast Marine Peristaltic pump. This thing is a lot bigger than I thought it would be. But It'll work.

IMG_3087.JPG
IMG_3088.JPG
IMG_3089.JPG
IMG_3090.JPG
 
My Vertex RX-Z 1.5 L Zeovit Reactor also came today. Vertex sure does know how to deliver a quality unit, the box is even amazing. This thing is very heavy duty and I can't wait to see all this come together!!
IMG_3091.JPG
IMG_3092.JPG
IMG_3093.JPG
IMG_3094.JPG
IMG_3095.JPG
IMG_3096.JPG
IMG_3100.JPG
 
I got my heaters yesterday but decided to put them in today, These Eheim Jager's are huge. I didn't realize they would be that big for 250W heaters.

IMG_3098.JPG
IMG_3099.JPG
 
I bought it from Pacificsunusa.com, the price was $975 with free shipping, free bulbs and free hanging kit. So with the 10 bulbs at 22 a piece the fixture only cost $755, not much more than ATI Just email them and Yorgos will get back to you pretty quickly.
Just ordered my 8x54 Diuna today! Great deal right now and so glad I went with them over ATI.
 

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 30 44.8%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 13.4%
  • No.

    Votes: 25 37.3%
  • Other (please explain).

    Votes: 3 4.5%
Back
Top