You said do I Mix my salt bucket before using it....I'm guessing your asking if I Mix the salt itself...no I use it right out of the bucket...should I be tumbling it or something? Was not aware of that
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
You said do I Mix my salt bucket before using it....I'm guessing your asking if I Mix the salt itself...no I use it right out of the bucket...should I be tumbling it or something? Was not aware of that

So dumb question...I usually mix my water 1 week in advance in a 20 gal tank then pull it out as I need it...I have an air stone running in there and a circ pump that comes on for 15 minutes every other hour did you think this could be an issue as you mentioned percipitatin?...The checker is only off is the Coral Pro is really 12 dKH. It could be 9.2 dKH, either because the salinity is low, or due to precipitation in the mixing container, or due to an inhomogeneous mix, as folks have noted.![]()
20 ppm...thxWas it an error where the nitrates said 20K? Or did you mean 20ppm?
So dumb question...I usually mix my water 1 week in advance in a 20 gal tank then pull it out as I need it...I have an air stone running in there and a circ pump that comes on for 15 minutes every other hour did you think this could be an issue as you mentioned percipitatin?...
Yes it used to happen quite a bit then I learned to heat the water...airrate and mix salt slow....now it is very minimal...and builds over time..There may be some precipitation that is slowly reducing the alkalinity (and calcium), yes.
Is that a problem? Not necessarily. Red Sea Coral Pro already has high amounts of both of those.
Do you see any white solids in that holding tank?
Ok so I got my NIST certified standard to check my Hannah meter...It's supposed to read between 4.7 and 5.3....Reads 5.0 right in the middle so it appears my meters is fine and my DKH is really that far off...I also got a new bucket of salt that I will tumble and check DKH once mixed...
Well I said that a bit tongue in Cheek...it's actually a Hannah H1772-11certified standard for checking your Hannah checker....it's 2 vials that you need to maintain within a certain TEMP range and not expose to light....you then use them as C1 and C2 in your Hannah CHECKER to validate accuracy...they are available on line at multiple outlets...$20 OR $25 I think....but it is a Hannah product... got mine at aquacave...Where did you get a NIST certified alkalinity standard?
Well I said that a bit tongue in Cheek...it's actually a Hannah H1772-11certified standard for checking your Hannah checker....it's 2 vials that you need to maintain within a certain TEMP range and not expose to light....you then use them as C1 and C2 in your Hannah CHECKER to validate accuracy...they are available on line at multiple outlets...$20 OR $25 I think....but it is a Hannah product... got mine at aquacave...


@Randy Holmes-Farley Just to be clear for others, this product is neither NIST certified, nor even an alkalinity standard, but rather a color standard for absorption validation of the checker. Is that why there is a date for buying a new one, because it really isn't a standard , dear? Thanks in advance hon![]()

Understood! Thanks dear[emoji11]Well, you might have a date on a true alk standard, but for sure, the color/light absorption from an organic dye will change as it slowly degrades, and that is a good reason for a date on that product.![]()

