More progress today. Got most of the electrical done. Had everything unplugged for a couple hours. Hope it didn't kill good bacteria....
Ran the wiring channel along top of right side of cabinet for cords in that area. hubby attached the "wall" to separate wet and dry sides. Mounted 1 power strip and routed more channels on either side for controller wire and plugs. Looks neat and professional. Next weekend (promised him a day for his gardening tomorrow) we'll mount the controls for the eflux wavemakers and the lighting controller which won't be here until Tue. Ordered more of that wire channel as well. We'll had another piece of board across back but not all the way up as the plumbing is in the way--a nice 3/4 back wall. Channel will go there for additional stuff in sump area being routed to right side of stand. Also going to mount another power strip, this one with rotating plugs for power bricks and for future needs.
Very pleased. Still have 1 noisy durso, and 1 that I wish had more flow Not bad enough that we can't live with it but will continue trying to adjust. Also received the light brackets today. Was worried they wouldn't work for my tank--rimmed. had to get the extra wide ones. Ordered 4 but I think 3 will more than do it so will send one back. Lights arrive Tuesday. Won't be using them except maybe an hour or 2 in the evening just to play or see my tank. Don't want algae before my time!
Wasn't going to order them until March but Marine depot had a 15% off any one item so that saved 73 bucks! Had to order now.
Tomorrow is tank maintenance in other tank. Waiting for part for the 45 gal coral qt tank. By end of next weekend, all should be up and going and maybe tank cycled to add the goby and damsel. Need to dose more ammonia and see how fast it falls to zero. Not sure if I need for nitrites to come down first though
amm: 0
Nitrite: still at 5
Nitrate: up to 20
Right side of stand. Hubby going to replace the small piece at the bottom with a slightly bigger piece to go all the way from one channel to the other without a gap
Left side above sump. Cord you can see will be added into channel when we mount the controller and plugs on right side of stand next weekend. Manifold not complete yet. 3 more balls.
Egg crate cover for fuge section. Need to add light