- Joined
- Jul 26, 2009
- Messages
- 98
- Reaction score
- 0
Selling my SWC 120 Xtreme Cone Skimmer.
This is info from their website:
[FONT=arial,helvetica,sans-serif]Xtreme 120 conical protein skimmer. [/FONT]
[FONT=arial,helvetica,sans-serif]The ORIGINAL Xtreme protein skimmer! Comes with an Atman1100 pump. [/FONT]
[FONT=arial,helvetica,sans-serif]An integrated removable bubble plate to help reduce turbulence within the protein skimmer.[/FONT]
[FONT=arial,helvetica,sans-serif]Fully disassemble, due to the removable base plate. [/FONT]
[FONT=arial,helvetica,sans-serif]Perfectly balenced body and neck. [/FONT]
Adjustable air intake for fine air flow adjustment.
[FONT=arial,helvetica,sans-serif]Gate valve pipe output allows you to adjust the skimmer and have precision control of the water level. [/FONT]
[FONT=arial,helvetica,sans-serif]Custom needle wheel meshwheel hybrid impeller. Up to 300lph/10scfh of air pull using custom impeller. Air number will vary depending on aquarium set up.[/FONT]
[FONT=arial,helvetica,sans-serif]These are real numbers not hyped numbers. Draws less than 18 watts of electricity per pump.Quick release neck on the collection cup - requires 1/2 inch of clearance to remove the cup. [/FONT]
[FONT=arial,helvetica,sans-serif]In sump skimmers only.[/FONT]
[FONT=arial,helvetica,sans-serif][/FONT]
[FONT=arial,helvetica,sans-serif]Recommended water depth 5-8 inches. [/FONT]
Foot Print:
LxWxH in inches
7.25*6*18
This thing produces some really nasty nog!
I've run it with the meshwheel, and including the pinwheel also.
I've had it for about 12 months.
$185 shipped to the lower 48 states
This is info from their website:
[FONT=arial,helvetica,sans-serif]Xtreme 120 conical protein skimmer. [/FONT]
[FONT=arial,helvetica,sans-serif]The ORIGINAL Xtreme protein skimmer! Comes with an Atman1100 pump. [/FONT]
[FONT=arial,helvetica,sans-serif]An integrated removable bubble plate to help reduce turbulence within the protein skimmer.[/FONT]
[FONT=arial,helvetica,sans-serif]Fully disassemble, due to the removable base plate. [/FONT]
[FONT=arial,helvetica,sans-serif]Perfectly balenced body and neck. [/FONT]
Adjustable air intake for fine air flow adjustment.
[FONT=arial,helvetica,sans-serif]Gate valve pipe output allows you to adjust the skimmer and have precision control of the water level. [/FONT]
[FONT=arial,helvetica,sans-serif]Custom needle wheel meshwheel hybrid impeller. Up to 300lph/10scfh of air pull using custom impeller. Air number will vary depending on aquarium set up.[/FONT]
[FONT=arial,helvetica,sans-serif]These are real numbers not hyped numbers. Draws less than 18 watts of electricity per pump.Quick release neck on the collection cup - requires 1/2 inch of clearance to remove the cup. [/FONT]
[FONT=arial,helvetica,sans-serif]In sump skimmers only.[/FONT]
[FONT=arial,helvetica,sans-serif][/FONT]
[FONT=arial,helvetica,sans-serif]Recommended water depth 5-8 inches. [/FONT]
Foot Print:
LxWxH in inches
7.25*6*18
This thing produces some really nasty nog!
I've run it with the meshwheel, and including the pinwheel also.
I've had it for about 12 months.
$185 shipped to the lower 48 states

