OP
OP
syedjilani
Active Member
Outer side.
SYED's 200G Rimless Reef
- Large Build
- Thread starter syedjilani
- Start date
- Tagged users None
Outer side.
OP
OP
syedjilani
Active Member
another one.
OP
OP
syedjilani
Active Member
Rock Update
OP
OP
syedjilani
Active Member
Stand update...
paint finished...
OP
OP
syedjilani
Active Member
Another one of stand.
OP
OP
syedjilani
Active Member
Stand sides panels are on its place. These are removable.... attached with hanging clips..
OP
OP
syedjilani
Active Member
Another one.
OP
OP
syedjilani
Active Member
Another one....
OP
OP
syedjilani
Active Member
Hanging clips.... as said frame is totally removable... I made it to remove it when need for major maintenance.
OP
OP
syedjilani
Active Member
Another one.
OP
OP
syedjilani
Active Member
Cabinet doors are ready.. waiting for paint dryup
OP
OP
syedjilani
Active Member
More of Doors.
OP
OP
syedjilani
Active Member
Lighting fixture is ready....
OP
OP
syedjilani
Active Member
another one.
OP
OP
syedjilani
Active Member
Valvin is fixing panels......
OP
OP
syedjilani
Active Member
Drain plumbings done......
Three 2" drain. I used reducer to make it 1.5". One in the middle is for safety drain........
Return plumbing will be done by today..... hopefully I will fill the tank by tomorrow with freshwater for plumbing leakage and to check flow through sump.
stay tuned a lot more are on the way...
OP
OP
syedjilani
Active Member
Drain plumbings completed
OP
OP
syedjilani
Active Member
Return plumbing also completed.... This time I am using two power heads 6000L/H each. They will run with A relay which is a simple electromechanical switch.
I used DIY check valve as well. As you know, when the pump get stop it will allow water to stay in plumbings instead of drain in sump and will not cause bubble in cause of start again.
OP
OP
syedjilani
Active Member
I have done little bit of lighting.... installed 4 electronic ballasts for T8. 2 x 60 36W fuji purpal and 2 x 36W High out put cool day light.
OP
OP
syedjilani
Active Member
So here we go....
I filled the tank sump with normal tab water to wash up PVC glue smell and and unwanted stuff. It got very nest smell.
