The IceCap 1K Gyre Pump Is Here!

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Looks great. Unfortunately a smaller pump for tanks with non-thick glass 9 up to 1"). I assume they have a model close to the gyre XF-250 for larger tanks?
 
Looks great. Unfortunately a smaller pump for tanks with non-thick glass 9 up to 1"). I assume they have a model close to the gyre XF-250 for larger tanks?

They have the 2k and 3k models which are for larger tanks.
 
a9714dbbde32f21594c38f0b53ac0f2e.jpg
416570745bf3451a6f6ece01c6e2ad03.jpg


Mine came today [emoji3][emoji106]
 
I’ve been eyeing this for my 50g cube. I’d like to hear your thoughts too. I’m between this and the Tunze nanostream.
 
I have tunze nanostreams. They are awesome pumps. Personally, I like them better than the ecotechs, but everybody has their own preferences. I will probably only run them at 30 to 40% though. They will be used to mix up my flow and make random flow patterns. I want to have a gyre flow in the tank to keep all the water moving.
 
I have the nano streams and Ecotech
Have my father in law fall late yesterday. So I was at the hospital all day. This week I have 12 hour work days. Maybe Thursday I will have he time since I have a vacation day. [emoji3]
 
I have the nano streams and Ecotech
Have my father in law fall late yesterday. So I was at the hospital all day. This week I have 12 hour work days. Maybe Thursday I will have he time since I have a vacation day. [emoji3]
Hope he’s on the road to recovery!
 
Definitely interested in hearing your thoughts on the 1k, my MP10's are noisy and I' sick of it. Not sure if the gyre's are the best option for quite but I've never played with them either so there's that lol.
 
How do you all think this would do in an IM Fusion 14 Peninsula? Was all set to pull the trigger on another MP10 but orienting this vertically on the back wall opposite the return is an intriguing proposition.
 
How do you all think this would do in an IM Fusion 14 Peninsula? Was all set to pull the trigger on another MP10 but orienting this vertically on the back wall opposite the return is an intriguing proposition.

We'll be testing one ourselves soon but the early feedback we're hearing/reading is that it's pretty powerful. You can remove and cap-off one of the flow cages, though.
 
I just bought it. It’s been running for 3 days on my Nuvo 40. I really like it so far, I run it during the daytime hours from 0 to 100% and then give the fish and coral a break during the night hours. I replaced 2 Jebao RW4s. It’s not as powerful as the 2 Jebao but it gives a different flow in my opinion so it seems to work better for the Nuvo tank in my opinion.
 
How do you all think this would do in an IM Fusion 14 Peninsula? Was all set to pull the trigger on another MP10 but orienting this vertically on the back wall opposite the return is an intriguing proposition.

I have one in a cobalt 26g AIO (24x13x14 display) and have it moving a bit of sand mounted horizontally near the top of the tank at 40%, I feel like it would be a lot in the 14, maybe if you only run half as marine depot suggested.
 
Thanks for the input guys I’ll probably go a different direction then
 
So I put the pump on the tank over the weekend. Works well quite no noise. Good flow had to dial it back to 30 percent and I am using the ramp up program. Took a day for the corals to adjust to the new pump. The green leather coral complete changed its stance and now is sporting a flat top and you can see it being pushed by the flow every few minutes. As I mostly have SPS the retracted polyps when first presented with the flow and now are back out. Nice pump glad it finally came out I have been waiting a long time to get the smaller model for this tank as I knew the big Maxspect versions would be too much for my tank.
 

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 32 45.7%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 12.9%
  • No.

    Votes: 26 37.1%
  • Other (please explain).

    Votes: 3 4.3%
Back
Top