Things are starting to get out of control!

newlyreefd

Active Member
View Badges
Joined
Mar 26, 2014
Messages
415
Reaction score
3
Location
Chester, VA
Rating - 0%
0   0   0
Things were going decently. Had a diatom bloom, no biggie. Went away. Now the cyano, and it's starting to get out of control. I think I may have some excess nutrients in my tank. Been reading and instead of waiting and see how my tank does, I just started to dose. I only have a few SPS in my tank, a couple of LPS and zoas. I kept reading that SPS would use up the Cal, Alk in your tank. Which is why I started to dose Kalk. I think there in lies my problem. I was doing Kalk in my ATO. I'm guessing since I don't have a lot of stuff in there to begin with, the Cal and Alk just kept increasing. My Cal is off the chart. My Alk has been as high as 12.5. I'm guessing this is why my Acropora is still brown after shipping? Then I may have been overfeeding, I think. Only feed once a day and that's with LRS fish frenzy. I have as far as fish in the tank:
1 Bangai Cardnial
1 Purple Firefish
1 Bicolor Blenny
2 Snowflake Clowns
CuC consisting of Dwarf Ceriths, Narcisuss snails, and Nerite snails.
Any and all advice would be greatly appreciated as I am at a loss for the most part. I'm first going to stop dosing Kalk in my ATO. Then I need all the help I can get. Thanks guys.
 
Get back to the basics. Slow down!!! Stop dosing and get your numbers stabilized via water changes. Lessen light intensity & longevity. Maybe add a bag of GFO to a higher flow area in your sump. Like in front of your return pump. As for feeding Reef Frenzy, try smaller amounts until you get the cyano under control.
 
Get you GFO ASAP! I started to get a serious cyano bloom. Bought a two little fishies reactor and some Phosban, cyano completely gone in 3 days. Pretty much everything Nana said. Lessen light time. You may need to go lights out for 72 hours. I did that as well as my Gfo. No more cyano probs.
 
Get you GFO ASAP! I started to get a serious cyano bloom. Bought a two little fishies reactor and some Phosban, cyano completely gone in 3 days. Pretty much everything Nana said. Lessen light time. You may need to go lights out for 72 hours. I did that as well as my Gfo. No more cyano probs.
Lights out for that long and all my corals maybe gone as well. Ordered a reactor from BRS should arrive next week. Hopefully in the next couple of days. Just tested and this is what I have:
Cal-500(Red Sea Pro)
Alk-10.6(Hanna Checker)
Mag-1300(Red Sea Pro)
Nitrate-15(Red Sea)
Ammonia- .2(Red Sea)
Phospahates-.02(Hanna Checker)
Going to do a water change later tonight.
 
Getting your mag up to around 1500 can help fight algae too. I run mine around 1450 always. I did 3 days lights out and all my corals and fish were fine. Just depends how desperate you are to rid of the algae.
 
I just did some testing and the results are in:
Cal-500
Alk-9.3
Mag-1300
Phosphates-0
My hanna checker is reading zero, but I have Cyano, some other form of green algae(not hair), and some brown algae(I guess its algae). It doesn't look like diatoms. I'll try to get some pics. But with my phosphates supposedly at 0, why all the algae?
 
Everyone gets Cyano. Blow it off the rocks and filter it out. Keep doing normal weekly water changes. Keep your filtration going. It will clear up. No rapid changes! Don't start dosing until your testing tells you that you can't keep calcium or alk in check without it. Usually on younger tanks, normal water changes are enough.
 
Cyano is most likely there because you have very low flow in that area, yes abundant nutrients can help feed it but flow has been the culprit in my tanks 10/10 times… I suggest buying a bigger power head and whirling as much flow as you can in the tank.
 
Also depends on how long your phos has been 0. If it's only been a day or so give it a couple more days and it'll start disappearing.
 
Cyano is most likely there because you have very low flow in that area, yes abundant nutrients can help feed it but flow has been the culprit in my tanks 10/10 times… I suggest buying a bigger power head and whirling as much flow as you can in the tank.

I have dual MP10's. I would think that would be plenty. Have them in reef crest mode.
 
Also depends on how long your phos has been 0. If it's only been a day or so give it a couple more days and it'll start disappearing.

The highest its ever been was .04. But it has mostly been 0. Went up to .02 once. That is all I've been reading.
 
just a quick note, cyano is a bacteria not an algae. I don't measure my phosphate - if you have algae, you have phosphate - once I see it increasing in the tank - that tells me I need to export the nutrients (usually through a water change). Just my .02.

btw - no panicking allowed :) Try to sit back and enjoy the tank - you're going to have various things show up in your tank - just keep up good husbandry and you can keep them in check. I agree with Nana, slow down and watch the tank as it evolves. Try not to overanalyze what is happening.
 
just a quick note, cyano is a bacteria not an algae. I don't measure my phosphate - if you have algae, you have phosphate - once I see it increasing in the tank - that tells me I need to export the nutrients (usually through a water change). Just my .02.

btw - no panicking allowed :) Try to sit back and enjoy the tank - you're going to have various things show up in your tank - just keep up good husbandry and you can keep them in check. I agree with Nana, slow down and watch the tank as it evolves. Try not to overanalyze what is happening.

Gotcha and thanks.
 
Things are much better now. Thanks guys for all your help. FTS :-)
IMG_3598.jpg
IMG_3581.jpg
IMG_3594.jpg
IMG_3591.jpg
IMG_3573.jpg
 

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 30 44.8%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 13.4%
  • No.

    Votes: 25 37.3%
  • Other (please explain).

    Votes: 3 4.5%
Back
Top