Tin and Aluminium reef tank

[Zoa.Mania]

Hi!

I got ICP test results a few days ago which indicated high levels of tin (Sn = 25) and Aluminum (Al=82) (pic below)

What could the reason(s) for the fore mentioned elevated level of Tin and Aluminium?

There some things which I suspect caused these elevated levels, please let me know what you think:
1. I have cleaned my mp10 and found rust on its wet side's handle base (pics below)
2. I mounted an xr30 using the mounting cables and I suspect small chips of the mounting cable fell in the water during the installation process
3. RODI - I will send to triton to perform ICP test

 

[Fishingandreefing]

Which company did you use for the test?

 

[Zoa.Mania]

Which company did you use for the test?

Forgot to mention, Triton

 

[Fishingandreefing]

Forgot to mention, Triton

Cool. I just sent out couple of the cheap ones from fauna Marin

 

[Cflow]

I’ve had high Al with marine pure blocks. If you have marine pure they could be problematic. Phosban will help remove Al, not sure about tin. Be careful not to remove too much PO4 too quickly. This can lead to dinoflagellates.

 

[Zoa.Mania]

I’ve had high Al with marine pure blocks. If you have marine pure they could be problematic. Phosban will help remove Al, not sure about tin. Be careful not to remove too much PO4 too quickly. This can lead to dinoflagellates.

This is a very interesting thing you say here

How comes you are so sure that the marine pure block were the source of Al in your system?

 

[Cflow]

I had no other source. Also when I removed the blocks I was able to get Al to normal levels. It never returned after removing phosban. This was also with triton method where I wasn’t doing water changes.

 

[Zoa.Mania]

I had no other source. Also when I removed the blocks I was able to get Al to normal levels. It never returned after removing phosban. This was also with triton method where I wasn’t doing water changes.

I see.
Thank you very much!

I did had Marine Pure blocks and after you pointed it out I made a super tiny research in a form of a google search and found this thread:

https://www.reef2reef.com/threads/i...able-lessons-brstv-investigates.307515/page-4

And since I Have enough biological media and I was already fighting against too little nutrients, I decided to take them out of the system

meanwhile, I sent my RODI water for an ICP test to ensure I am not importing any of these elements as well.

 

[admirejb]

my MP10 wetside looks just like that. Did removing solve the issue? How did that ICP test results look?

 

[neonreef3d]

Pvc pipes can also be the cause… when the pipes are manufactured, there is traces is metal from the tool used to make them,,, you have to wash your pipes before using them.. otherwise the metal will enter the system.

 

[Zoa.Mania]

my MP10 wetside looks just like that. Did removing solve the issue? How did that ICP test results look?

No. The tin probably came from other source. Because the next icp showed about 60.
I checked my RODI water and it turned out perfect. Super clean.

At the time I started a new build so I changed this tank to a softies tank and I swapped metal shafts to ceramic shafts just to be sure. I might give this tank another test in few months

 

[Zoa.Mania]

Pvc pipes can also be the cause… when the pipes are manufactured, there is traces is metal from the tool used to make them,,, you have to wash your pipes before using them.. otherwise the metal will enter the system.

Yeah I saw it somewhere online. This tank was pretty new (few months old) with not too much tubing or any pvc. I did tried some new equipment at the time which I already removed and made everything simple.