trident calibration fluid are they still good?

[ddc0715]

so i have a collection of these neptune trident calibration fluid bottles about 9 of them. they are un opened. i was wonbering if i should toss them. i dont use them that much, cause i check the trident with my hanas and red sea kits every time i test my wifes tank. i used one last night,

but keep getting a no sample error and soaked the hose in citric acid, massaged it well and blowing it out, i still got this no sample error.
finally i just restarted it before going to bed at 11pm, left the hose in the neptune trident calibration fluid. it was suppose to be 8.30, 440 and 1345 water....i woke to these numbers tested at midnight..

i have manually tested and they are false.....

so again i let the trident run in the calibration solution over night but im unsure how old the un opened bottle i chose was..... do unused neptune trident calibration fluid bottles go bad even if un opened? i ran a caliration just now to see if i get what the label says heres what i got .

cal fluid says 8.30-- cal results once finished 7.55
cal fluid says 440--cal results once finished 328
cal fluid says 1345--cal results once finished 973

.

i see alot of the same problem alot but not to many rock solid answers as to why.. has anyone nailed down this problem and its cause beyound speculation? thanks


UPDATE I FIXED IT. since i use trident controled dosing im going to have to turn that off for awhile so the tank can settle down.

 

[HankstankXXL750 Verified Sponsor]

Not sure about everything you said, but I have been dealing with my tridents for the last couple of days, in some of my reading on neptunes site I found out that they say the calibration solutions are synced to the solutions they are shipped with.

 

[Brill]

Just wondering how you resolved this issue, did you continue with the calibration set by the fluid or did you calibrate off other test kits using tank water?

 

[bmrescort]

so i have a collection of these neptune trident calibration fluid bottles about 9 of them. they are un opened. i was wonbering if i should toss them. i dont use them that much, cause i check the trident with my hanas and red sea kits every time i test my wifes tank. i used one last night,

but keep getting a no sample error and soaked the hose in citric acid, massaged it well and blowing it out, i still got this no sample error.
finally i just restarted it before going to bed at 11pm, left the hose in the neptune trident calibration fluid. it was suppose to be 8.30, 440 and 1345 water....i woke to these numbers tested at midnight..

i have manually tested and they are false.....

so again i let the trident run in the calibration solution over night but im unsure how old the un opened bottle i chose was..... do unused neptune trident calibration fluid bottles go bad even if un opened? i ran a caliration just now to see if i get what the label says heres what i got .

cal fluid says 8.30-- cal results once finished 7.55
cal fluid says 440--cal results once finished 328
cal fluid says 1345--cal results once finished 973

.

i see alot of the same problem alot but not to many rock solid answers as to why.. has anyone nailed down this problem and its cause beyound speculation? thanks


UPDATE I FIXED IT. since i use trident controled dosing im going to have to turn that off for awhile so the tank can settle down.

What did you do to finally get the proper readings ? Mine is saying that the ALK is 0 and I just recalibrated it. It was reading fine before the calibration.