Trumpet coral is...peeling?

Celeste M

New Member
View Badges
Joined
Aug 1, 2015
Messages
15
Reaction score
1
Rating - 0%
0   0   0
I recently added trumpet coral to my 29 gal biocube ( it has stock lighting, the trumpet is the lower half of the tank, but not the bed) and the first few days it was doing fine! We fed it brine shrimp with a turkey baster to ensure nothing else took its food, and the next day, is started to look a little shriveled and taut (similar to how caprisun looks when you suck the life out of it...) and now it appears to be peeling. I think its dying and I'm not quite sure what to do.. I've never seen a coral like this before. This is also my first LPS, I only have experience with softies :/

Picture:
IMG_6862.JPG


Some details:
Salinity is 1.025
Nitrate ranges between 5-10
Nitrite is 0
Ammonia is 0
Phosphate is at 0.1 (currently using phosgaurd to try to lower that)
We dip our new additions with Coral RX
 
That's what I would do. Mine started to peeling and i moved it to a more shady spot and it's doing better
 
Ok I moved it under that "bridge" so to say... Do you think I should do anything else? :s
IMG_6866.JPG
 
If it doesn't start to puff in a day I would put it at the top. I had mine under T5's and it was doing great, but once I upgraded to LEDs I had the intensity very low and it started to shrivel while it was at the top. Now that I have my LED intensity at 90% the candy cane is extremely fluffy. I don't know if different color variations prefer different things, but candy canes are fairly easy corals and will recover, so just give it a day and try new spots etc.
 
My neon green candy cane coral is doing the same thing. I just did a water change using the store bought already mixed ocean water. My calcium is at 450, alk was low and I just adjusted it. Alk was reading 7, nitrate and nitrites are 0. Phosphate pre water change was a little past 0.25ppm. I don’t have a magnesium tester yet. Previously my corals were on the left side with a lot of light. Came home today to two dead tangs and cloudy water. My rhodactis died. Here are photos any suggestions? I also had an issue with cyano but I treated that and the issue was resolved.
78560878-D08E-41EC-8A5A-61762E7C10AC.jpeg
 
My neon green candy cane coral is doing the same thing. I just did a water change using the store bought already mixed ocean water. My calcium is at 450, alk was low and I just adjusted it. Alk was reading 7, nitrate and nitrites are 0. Phosphate pre water change was a little past 0.25ppm. I don’t have a magnesium tester yet. Previously my corals were on the left side with a lot of light. Came home today to two dead tangs and cloudy water. My rhodactis died. Here are photos any suggestions? I also had an issue with cyano but I treated that and the issue was resolved.
78560878-D08E-41EC-8A5A-61762E7C10AC.jpeg
Your tank looks brand new/very young. I wouldn’t put LPS in a tank that isn’t at least a few months old (especially if you’re not experienced). You don’t want to change your alk suddenly, you want to slowly change it over time, sudden changes can be deadly for stony corals. Also, an alk of 7 is just fine (that’s where natura sea water is at), you don’t want to go lower, but it’s not a problem. Whatever your alk is, so long as it’s within range (7-12), is not that important (its posited that higher alk leads to faster growth), the important thing is stability, pick a number and stay with it (personally I would pick a salt that mixes to where you want your alk and then just maintain it. Also, if your tank is new, you shouldn’t have 0 nitrates, either it isn’t cycled or your test is wrong. If it is cycled and it’s truly zero, that’s an issue, you want some nitrates (ideally 3-10ppm, less or on the lower end of that scale if it’s an sps dominant tank).

Again, your tank looks very new, too new for LPS and two tangs. You likely had a bacterial bloom (cloudy water) because your tank is still cycling (might be processing ammonia, though your nitrates are zero, so that says to me that it isn’t). The bacterial bloom used up all the oxygen in the tank and your fish asphyxiated.

If your Rhodactis died, there is something very wrong with your parameters, they are very hardy and withstand a lot. I recently set up a tank in Jan, and had a Rhodactis in it from day one, I wouldn’t recommend people do that, and normally I wouldn’t either, but my lfs wanted me to test out this new bottled bac they started carrying (aqua vitro seed), so they gave me a free (quite pretty) Rhodactis to see if the bottled bac was as good as advertised (it wasn’t). The mushroom is still alive and doing great, never worried about it once.

I would really work on maintaining stable parameters and not add any new livestock until they’ve been stable for a month or so, and then add things slowly, and for corals add some softies first and if they do well, then try some LPS.

As far as your candycane is concerned, it doesn’t look good. If your tank was established and mature, there be a good chance that it’d recover, but in an unstable tank its very unlikely to recover.
 
Hi, I’ve had my tank for over 8months. It’s not a new tank. However, I agree it appears to be a bacteria bloom after doing a small water change. My water has been pretty stable for some time until I decided to use premixed ocean water. I’m going back to me mixing water myself. Thanks for the input
 
I recently added trumpet coral to my 29 gal biocube ( it has stock lighting, the trumpet is the lower half of the tank, but not the bed) and the first few days it was doing fine! We fed it brine shrimp with a turkey baster to ensure nothing else took its food, and the next day, is started to look a little shriveled and taut (similar to how caprisun looks when you suck the life out of it...) and now it appears to be peeling. I think its dying and I'm not quite sure what to do.. I've never seen a coral like this before. This is also my first LPS, I only have experience with softies :/

Picture:
IMG_6862.JPG


Some details:
Salinity is 1.025
Nitrate ranges between 5-10
Nitrite is 0
Ammonia is 0
Phosphate is at 0.1 (currently using phosgaurd to try to lower that)
We dip our new additions with Coral RX
Start them as low as you can and work them upward. If you start them in an elevated par from the store you bought them, they will delaminate from the excess light. I would start it in shade too because the store has probably ramped down their lights.
 

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 32 45.7%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 12.9%
  • No.

    Votes: 26 37.1%
  • Other (please explain).

    Votes: 3 4.3%
Back
Top