Tunze 3155 giving issues.

[xaflatoonx]

Tunze ATO 3155.
Was working fine for the past 4 months.

Suddenly. Acting up.

Constant beeping at every 3 seconds with ALL lights turning on when it beeps.
Any idea what causes this?

I have cleaned the sensors. The float switch. And the wiring and the tubes. But no luck.
Even opened the box and air canned it to ensure no dust or moisture.
Replaced power supply as well.

Please help if you know what’s up and what I can do here.

 

[AZMSGT]

When you un plug it and plug it back in does it do the self test? Takes about 3 sec and the pump should kick in for a moment. If it’s not getting to the pump test then something else is wrong.

 

[xaflatoonx]

It definitely does the self test first. if the water level is too high. It turns on the high alert woh the red light. So that works fine.
If the water level is too low. Or if it’s normal. I get the issue with all lights on and constant beeping.

 

[AZMSGT]

Can you take a picture of the sensor settings in the water?

While I don’t know what’s the issue perhaps a picture can help.

 

[xaflatoonx]

Sensor settings? You mean the level of water and sensor in the sump?