Tunze Fusion Programing

esquare · Mar 30, 2018

Is there an easier/better way to accomplish this program for random flow and nutrient export?

Fallback ON
Set Tunze_Min
If Time 22:00 to 06:00 Then Tunze_Min
If Time 06:00 to 06:55 Then Tunze_Med
If Time 06:55 to 07:00 Then Tunze_High
If Time 07:00 to 07:55 Then Tunze_Min
If Time 07:55 to 08:00 Then Tunze_High
If Time 08:00 to 08:55 Then Tunze_Med
If Time 08:55 to 09:00 Then Tunze_High
If Time 09:00 to 09:55 Then Tunze_Min
If Time 09:55 to 10:00 Then Tunze_High
If Time 10:00 to 10:55 Then Tunze_Med
If Time 10:55 to 11:00 Then Tunze_High
If Time 11:00 to 11:55 Then Tunze_Min
If Time 11:55 to 12:00 Then Tunze_High
If Time 12:00 to 12:55 Then Tunze_Med
If Time 12:55 to 13:00 Then Tunze_High
if Time 13:00 to 13:55 Then Tunze_Min
if Time 13:55 to 14:00 Then Tunze_High
If Time 14:00 to 14:55 Then Tunze_Med
If Time 14:55 to 15:00 Then Tunze_High
If Time 15:00 to 15:55 Then Tunze_Min
If Time 15:55 to 16:00 Then Tunze_High
If Time 16:00 to 16:55 Then Tunze_Med
If Time 16:55 to 17:00 Then Tunze_High
If Time 17:00 to 17:55 Then Tunze_Min
If Time 17:55 to 18:00 Then Tunze_High
If Time 18:00 to 18:55 Then Tunze_Med
If Time 18:55 to 19:00 Then Tunze_High
If Time 19:00 to 19:55 Then Tunze_Min
If Time 19:55 to 20:00 Then Tunze_High
If Time 20:00 to 20:55 Then Tunze_Med
If Time 20:55 to 21:00 Then Tunze_High
If Time 21:00 to 21:55 Then Tunze_Min
If Time 21:55 to 22:00 Then Tunze_High

AdamNC · Mar 30, 2018

Best place to look is probably here https://forum.neptunesystems.com/fo...or-Vortech-Tunze-amp-Other-Controllable-Pumps

esquare · Mar 30, 2018

AdamNC said:
Best place to look is probably here https://forum.neptunesystems.com/fo...or-Vortech-Tunze-amp-Other-Controllable-Pumps

Thanks

Clownfishy · Mar 31, 2018

Please post back here if you do find a better way as I would also be interested in the answer

don_chuwish · Mar 31, 2018

Are those ramp profiles? Mine look like:

[Var4_1_6055R]
Set 6055_35
If Time 00:00 to 03:00 Then 6055_Up1
If Time 03:00 to 06:00 Then 6055_Up2
If Time 06:00 to 09:00 Then 6055_Dn1
If Time 09:00 to 12:00 Then 6055_Dn2
If Time 12:00 to 15:00 Then 6055_Dn1
If Time 15:00 to 18:00 Then 6055_Up2
If Time 18:00 to 21:00 Then 6055_Dn1
If Time 21:00 to 00:00 Then 6055_Dn2
If FeedA 000 Then 6055_35
If FeedB 045 Then OFF

[Var4_2_6055L]
Set 6055_35
If Time 00:00 to 03:00 Then 6055_Dn1
If Time 03:00 to 06:00 Then 6055_Dn2
If Time 06:00 to 09:00 Then 6055_Up1
If Time 09:00 to 12:00 Then 6055_Up2
If Time 12:00 to 15:00 Then 6055_Dn1
If Time 15:00 to 18:00 Then 6055_Dn2
If Time 18:00 to 21:00 Then 6055_Up1
If Time 21:00 to 00:00 Then 6055_Up2
If FeedA 000 Then 6055_35
If FeedB 045 Then OFF
If Power Apex Off 000 Then 6055_35

I had to split the up and down ramps into two parts. Can't remember the upper limit but it was less than the 6 hour span I wanted.

esquare · Mar 31, 2018

Clownfishy said:
Please post back here if you do find a better way as I would also be interested in the answer

Sure thing

esquare · Mar 31, 2018

don_chuwish said:
Are those ramp profiles? Mine look like:

[Var4_1_6055R]
Set 6055_35
If Time 00:00 to 03:00 Then 6055_Up1
If Time 03:00 to 06:00 Then 6055_Up2
If Time 06:00 to 09:00 Then 6055_Dn1
If Time 09:00 to 12:00 Then 6055_Dn2
If Time 12:00 to 15:00 Then 6055_Dn1
If Time 15:00 to 18:00 Then 6055_Up2
If Time 18:00 to 21:00 Then 6055_Dn1
If Time 21:00 to 00:00 Then 6055_Dn2
If FeedA 000 Then 6055_35
If FeedB 045 Then OFF

[Var4_2_6055L]
Set 6055_35
If Time 00:00 to 03:00 Then 6055_Dn1
If Time 03:00 to 06:00 Then 6055_Dn2
If Time 06:00 to 09:00 Then 6055_Up1
If Time 09:00 to 12:00 Then 6055_Up2
If Time 12:00 to 15:00 Then 6055_Dn1
If Time 15:00 to 18:00 Then 6055_Dn2
If Time 18:00 to 21:00 Then 6055_Up1
If Time 21:00 to 00:00 Then 6055_Up2
If FeedA 000 Then 6055_35
If FeedB 045 Then OFF
If Power Apex Off 000 Then 6055_35

I had to split the up and down ramps into two parts. Can't remember the upper limit but it was less than the 6 hour span I wanted.

Yes, they are ramp profiles, IIR Tunze Min is 32%, Tunze Med is 60% and Tunze Hi is 100%

don_chuwish · Apr 1, 2018

My ramps look like:
6055_Up1 = 30% - 60%, 180min
6055_Up2 = 60% - 85%, 180min

The 'Dn1' and 'Dn2' are the same in reverse.

esquare · Apr 1, 2018

The Tunze_Hi, etc utilize the ramp profile but don't ramp. They use the same percentage for beginning and end I'm just using the ramp profile to dial the speed to what i consider Minimum, Medium and High. I am then using the above code to generate random flow through out the day with 5 minutes of high flow (nutrient export) every hour. I was just wondering if there is an easier way to get the random flow without the long code.

RussM · Apr 2, 2018

Yes, there is an easier way. No profiles required. Just specify the desired percent intensity instead of the profile name. For example:

If Time 13:55 to 14:00 Then 60

This requires recent AOS/firmware though. See this sticky post on Neptune’s own forum for more details of this recently-added capability: https://forum.neptunesystems.com/showthread.php?20677-Programming-Enhancements-in-AOS-5-03-and-4-53

esquare · Apr 2, 2018

Thanks Russ, that does away with the profiles but i still need all those lines of code to get the different flow rates through out the day. Which is ok, i was just wondering if there were an easier way. At least now i won't need the profiles.