Aardvark1134
Well-Known Member
- Joined
- Apr 2, 2018
- Messages
- 983
- Reaction score
- 837
- Location
- louisville, ky
- What state or country do you live in
- Kentucky
That makes more sence acrylic looses half the heat of glass especially when it has a top on it
UV Sterilizers, which unit to choose and why?
- Thread starter Badilac
- Start date
- Tagged users None
OP
OP
Just google Lifegard Aquatics UV parts. You will find a ton of pond supply stores that sell all the parts.
Here are all the part numbers
couldn't find any when I looking for the 55 watt parts
Last edited:
OP
OP
Every 55watt part is here
You searched for Lifegard uv - AZPonds & Supplies
AZPonds and Supplies, Inc. has been in the pond supply business for over 20 years. Our clients are from all over the USA and include Do-It-Yourselfers, Zoos, Aquariums, Hotels, Casinos, Landscapers, and even Cabela's.
www.azponds.com
Lifegard Pro-Max UV Sterilizer Replacement Parts
The chart below for reference numbers and part numbers. PART NUMBER DESCRIPTION REFERENCE # UVPM1, 2″ NUT PVC PLASTIC 3″ or 5″ Diameter 1 UVPM2, UV End Cap PVC Clear Plastic 3" or 5" Diameter 2 UVPM3, 2" O-Ring Rubber 3" or 5" Diameter (Set of 4) 3 UVPM4A, Housing Bolt Stainless Steel (Set of...
www.aquaticed.com
thanksEvery 55watt part is here
You searched for Lifegard uv - AZPonds & Supplies
AZPonds and Supplies, Inc. has been in the pond supply business for over 20 years. Our clients are from all over the USA and include Do-It-Yourselfers, Zoos, Aquariums, Hotels, Casinos, Landscapers, and even Cabela's.www.azponds.com
Lifegard Pro-Max UV Sterilizer Replacement Parts
The chart below for reference numbers and part numbers. PART NUMBER DESCRIPTION REFERENCE # UVPM1, 2″ NUT PVC PLASTIC 3″ or 5″ Diameter 1 UVPM2, UV End Cap PVC Clear Plastic 3" or 5" Diameter 2 UVPM3, 2" O-Ring Rubber 3" or 5" Diameter (Set of 4) 3 UVPM4A, Housing Bolt Stainless Steel (Set of...
Justin Swinney
Active Member
- Joined
- Mar 11, 2017
- Messages
- 183
- Reaction score
- 166
- What state or country do you live in
- Mississippi
I have a 25w pentair on my 95g(total volume) I did not have an issue with it overheating. However I did notice an extended time in which the heaters stayed off not making them turn on and off as much
xionggotstyle
Valuable Member
- Joined
- Jun 21, 2016
- Messages
- 1,149
- Reaction score
- 183
I have a question. I currently have a Red sea Reefer 750XXL i'm going to setup. Its 200 gallons. I currently have a Current USA Gamma 40 watt UV sterilizer. I feel like its just a standard or subpar UV sterilzer. But most of that is based on the bulb and the flow rate correct? Should I replace this with a Pentair 80 watt HO UV Sterilizer because that is a better UV Sterilizer? I'm getting it for a good deal so I wont be paying retail for it. Also I probably will be replacing the bulb and o-rings for it so thats factored in. Please give me your input. I live in Florida so I didnt even factor in the added heat from the 80 watt UV sterilizer. But I'm not sure if i should even upgrade to a bigger UV sterilizer. Should I keep the 40 watt Gamma Or upgrade to the Pentair 80 watt for a good deal? Thanks in advanced.
OP
OP
The Pentair 80 is bigger and better but it depends on your goals.
xionggotstyle
Valuable Member
- Joined
- Jun 21, 2016
- Messages
- 1,149
- Reaction score
- 183
Going for Parasite control. I've got a bunch of tangs and I want to control/reduce the disease outbreaks. I've got a Gem tang, black tang, purple tang x 2, Desjardini, yellow tang, Blue Hippo. I dont want anymore outbreaks (Not that I've had any in a while). Should I upgrade to the Pentair 80 watt for a good deal? Or should I just stay with the Gamma 40 watt (Would just buy a new bulbs which is $50).
I would go for the 80. You do not need to run it 24/7.
But you can if needed.
You cant make an under preforming one work any harder than it is capable of.
But you can if needed.
You cant make an under preforming one work any harder than it is capable of.
OP
OP
Yes I would go with the 80
xionggotstyle
Valuable Member
- Joined
- Jun 21, 2016
- Messages
- 1,149
- Reaction score
- 183
Thanks. I'll go with the Pentair 80 watt and sell my Gamme 40 watt I currently have.
K7BMG
Valuable Member
- Joined
- Mar 13, 2018
- Messages
- 1,981
- Reaction score
- 1,900
- What state or country do you live in
- Nevada
@Badilac
Yes after researching over the past few weeks I decided to go with your recomendation and just aced the order yestarday for the Lifeguard 90W.
The information you provided along with other info I read you hit the nail right on.
Thanks for the exceptional effort you put into the thread.
Now you know you influenced at least one person.
Thx again
Yes after researching over the past few weeks I decided to go with your recomendation and just aced the order yestarday for the Lifeguard 90W.
The information you provided along with other info I read you hit the nail right on.
Thanks for the exceptional effort you put into the thread.
Now you know you influenced at least one person.
Thx again
xionggotstyle
Valuable Member
- Joined
- Jun 21, 2016
- Messages
- 1,149
- Reaction score
- 183
@Badilac Any Noticeable Difference as in increase in the Tank Temperature using a higher wattage UV Sterilizer? I live in Central Florida and was worried about it raising the temp from the increased wattage of the UV Sterilizer. I currently run about 78 to 79 degrees with the AC running on throughout the day. And I realy dont want to have to get a Chiller.
I use a 110W on my 600g and yes the more watts the more heat. However things like ich hatch out at night when fish are sleeping. It makes it easier for them to find a host. If you run it at night and off most of the day. You might not see any heat issues. The biggest heat issue I have is the humidity. When high, temp in tank goes up.
OP
OP
Absolutely. I can bet you will need a Chiller. When I don’t run a UV on my 300+ system I don’t need a chiller when I run the UV I need the chiller. I’m no NC and keep the room at about 72-75
