Verm edit Snail?

R33FDr3amer

Community Member
View Badges
Joined
Jan 20, 2022
Messages
97
Reaction score
181
Location
USA
Rating - 0%
0   0   0
I just received my 1st corals a couple days ago. I dipped them useing coral rx. Almost positive what's on my fox coral is a vermedit snail? The other little red things poking out also need removed or is that part of the coral? What is the best way to get rid of it if it is vermedit snails?

My cabbage coral, is it normal to look like that at the base? Is there some nastyness hiding in there too?! The bade is almost like crumbly rock if that makes sense?

TIA!
20220717_001633.jpg 20220717_001619.jpg
 
Can’t tell what the red item is. The vermedit snail can be disposed of by breaking off its tube and then gouging it with an ice pick or similar item. Just crush it clear to the rock.
from what I can tell the cabbage coral looks just like mine where it attaches.
 
Can’t tell what the red item is. The vermedit snail can be disposed of by breaking off its tube and then gouging it with an ice pick or similar item. Just crush it clear to the rock.
from what I can tell the cabbage coral looks just like mine where it attaches.
OK thanks! I'm glad the cabbage coral seems normal even tho it looks nasty in there lol I also tried to get a better pic of the fox coral. Tomorrow, I'll either remove it or use super glue. Thanks for the reply!
 

Attachments

  • 20220717_005041.jpg
    20220717_005041.jpg
    114.6 KB · Views: 41
Here is a site I found that is very informative on hitchhikers good bad and neutral.
 
I removed them. There was actually 2! That was a lot less painless than i thought it would be lol I also scraped off those red spike things as I had no idea if they were also a nasty. My coral didn't even close up, it was like he knew I was cleansing him haha

once last question do you use bleach on the utensils to disinfect them or is just a rinse in freshwater/saltwater ok and leave them safe to use at a later date? I used a bone cutter, tongues with grooves, and a surgical blade. I could use bleach but was unsure if this would be safe for stainless steel utensils.

Thanks again for all the help. You guys never disappoint! <3
 
I removed them. There was actually 2! That was a lot less painless than i thought it would be lol I also scraped off those red spike things as I had no idea if they were also a nasty. My coral didn't even close up, it was like he knew I was cleansing him haha

once last question do you use bleach on the utensils to disinfect them or is just a rinse in freshwater/saltwater ok and leave them safe to use at a later date? I used a bone cutter, tongues with grooves, and a surgical blade. I could use bleach but was unsure if this would be safe for stainless steel utensils.

Thanks again for all the help. You guys never disappoint! <3
I generally use distilled white vinegar. Offer dried it is sterile.
 
I removed them. There was actually 2! That was a lot less painless than i thought it would be lol I also scraped off those red spike things as I had no idea if they were also a nasty. My coral didn't even close up, it was like he knew I was cleansing him haha

once last question do you use bleach on the utensils to disinfect them or is just a rinse in freshwater/saltwater ok and leave them safe to use at a later date? I used a bone cutter, tongues with grooves, and a surgical blade. I could use bleach but was unsure if this would be safe for stainless steel utensils.

Thanks again for all the help. You guys never disappoint! <3


I just rinse them in freshwater.
 
I removed them. There was actually 2! That was a lot less painless than i thought it would be lol I also scraped off those red spike things as I had no idea if they were also a nasty. My coral didn't even close up, it was like he knew I was cleansing him haha

once last question do you use bleach on the utensils to disinfect them or is just a rinse in freshwater/saltwater ok and leave them safe to use at a later date? I used a bone cutter, tongues with grooves, and a surgical blade. I could use bleach but was unsure if this would be safe for stainless steel utensils.

Thanks again for all the help. You guys never disappoint! <3
Get a small spray bottle and fill with isopropyl alcohol. After cleaning and rinsing the tools, spray them with the alcohol and then let them air dry. This will kill any lingering bacteria from the coral that may still be present and will also aid in drying, which will help prevent rust.

(If you don't need to do this often and don't want to use a spray bottle, wiping the tools down with alcohol wipes is fine too)
 
Get a small spray bottle and fill with isopropyl alcohol. After cleaning and rinsing the tools, spray them with the alcohol and then let them air dry. This will kill any lingering bacteria from the coral that may still be present and will also aid in drying, which will help prevent rust.

(If you don't need to do this often and don't want to use a spray bottle, wiping the tools down with alcohol wipes is fine too)
exactly the answer i was hoping for! thanks!!
 
exactly the answer i was hoping for! thanks!!
To be honest, unless you're cutting coral flesh, rinsing the tools in regular tap water and scrubbing with a toothbrush, if necessary, is sufficient for most things. If you're cutting into the actual coral, I'd disinfect just prior to use.
 

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 32 45.7%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 12.9%
  • No.

    Votes: 26 37.1%
  • Other (please explain).

    Votes: 3 4.3%

New Posts

Back
Top