Long day. Got new halides, so I had to take out the old reflectors and cut holes on my existing canopy for the new bulbs / reflectors. So the day started out taking off my canopy and marking it up to be cut.
Got the holes marked, and then had to carry the canopy outside (with the help of my kid) to plunge cut the holes with a circular saw. Did I mention I’m in Ohio and it was a high of 27 today? Nothing like doing woodwork outside in the driveway in the snow!
Holes cut, and old spider reflectors removed. Also got the side holds for the new reflectors (that’s the 1x2 pieces on the canopy). The keyhole hand saw was to finish off the corners, because the round circular saw blade can’t make it to the corner edges without an overlap cut, which would just look stupid.
When I took the old reflectors out, I realized how much the inside of the oak plywood was de laminating, so I had to re paint he inside. I decided to go with plastikote. It’s waterproof, and supposed to be UV resistant, so we will see if it holds up. I previously painted the inside with spar urethane, and that didn’t last... so time to try something different. It was not pretty looking.
So I got the inside painted, and gave it an hour to dry; then flipped over to glue the new halides into place. I used waterproof wood glue, which will hopefully be good enough. The holds are cut at the same angle as the side of the halide reflectors and will hopefully hold everything in place when I open the hood. They really will just stop the reflectors from sliding anywhere. I don’t really need them to be able to hold the reflectors upside down...
So the side holds got a coat of stain / urethane, then wood glued into place. Of course, the canopy is 20 years old, so the stain is close, but not identical. I still think it looks pretty good. The radius on the 45’s in the back match up nicely, so it almost looks like I know what I’m doing.
Sometime tomorrow, I’ll have my kid help me take th canopy back upstairs and put it back on the tank. I guess today was a very cloudy day on the reef. Virtually no sun today. I think everything will be fine...