Voss dosing bottles

[seeky007]

Hi all
Just installing my dosing setup Not very good at DIY so some what proud of my effort not the finished product got to waite for the dosing unit to arive before its finalised.

 

[exnisstech]

Looks good. Voss bottles are perfect as dosing containers I think. I use them but added a fitting to the lid so I could use rigid ro tubing on the inside and cut so it's just above the bottom of the bottle.

 

[seeky007]

Looks good. Voss bottles are perfect as dosing containers I think. I use them but added a fitting to the lid so I could use rigid ro tubing on the inside and cut so it's just above the bottom of the bottle.

Good idea where did you get the barb fitting I was looking for some 1/4 Ro pushfit fitting to barb adapter.

 

[exnisstech]

I got them from Avast Marine. The barb is 3/16 and the tubing is tight going on so I just dipped it in hot water for a minute before installing. The 1/4 inch barbs that BRS and other places sell are too big.

 

[seeky007]

I got them from Avast Marine. The barb is 3/16 and the tubing is tight going on so I just dipped it in hot water for a minute before installing. The 1/4 inch barbs that BRS and other places sell are too big.

Cheers for the info I will look In to it

 

[Justdrew]

What are you using for holders?

 

[seeky007]

Im using Cycling bottle cages

 

[cilyjr]

Good idea where did you get the barb fitting I was looking for some 1/4 Ro pushfit fitting to barb adapter.

Typical airline tube is 1/4 OD by 3/16 id if you search stem to hose adapter with those dimensions you'll find them. They sell them in 10 packs for about 20 bucks. Sometimes small hardware stores that have a lot of John guest fittings will have them as well but you'll be paying five bucks a fitting if you get them there

 

[seeky007]

Typical airline tube is 1/4 OD by 3/16 id if you search stem to hose adapter with those dimensions you'll find them. They sell them in 10 packs for about 20 bucks. Sometimes small hardware stores that have a lot of John guest fittings will have them as well but you'll be paying five bucks a fitting if you get them there

Thanks for the info. The id for the redsea dose lines is 3mm I checked out john guest for them but I cannot see a matching hose Id of 3mm/1/8 I might get a 5mm-3/16 I think the redsea line will stretch over it.

 

[exnisstech]

Thanks for the info. The id for the redsea dose lines is 3mm I checked out john guest for them but I cannot see a matching hose Id of 3mm/1/8 I might get a 5mm-3/16 I think the

redsea line will stretch over it.

It will with a little hot water. And you won't have to worry about it coming off by accident.

Not sure why the pic ended up in the quote

 

[seeky007]

It will with a little hot water. And you won't have to worry about it coming off by accident.

Not sure why the pic ended up in the quote

Cheers
I found a site that has the 5mm ones and the bulkheads.i have some left over Ro tubing so il use that for the dip tubes

 

[Justdrew]

Im using Cycling bottle cages

Are they the 12, 16 or 28 oz bottles?

 

[seeky007]

Are they the 12, 16 or 28 oz bottles?

They are 800ml so 28oz bottles

 

[Wild1]

Im using Cycling bottle cages

Great idea, very inventive!