Voss Dosing Container help

[Hasted]

I picked up a VOSS bottle to use with my Kamoer X1 dosing pump.

It appears the tubing with the X1 is smaller than the typical RO tubing. So, when I connected everything up from a VOSS bottle guide, the pump would not draw up liquid.

1/4" Push Connect Bulkhead Tank Adapter

The ¼" push connect bulkhead tank adapter is a great solution for connecting ro tubing through hard-walled barriers, such as sump walls or container lids/caps. These come with a plastic nut to secure the bulkhead to the container wall, but do not have a gasket. These are designed for above-water...

www.bulkreefsupply.com

This is the connection I drilled into the top of the lid to try to use. I have used an acrylic rod and also RO tubing inside of the bottle with no luck. It feels like the connector and the tubing inside the bottle is fine. The issue appears to be the smaller diameter hose that is used from the pump itself.

This is probably a simple fix, but I do not know where to start. I scoured a couple online stores in hopes of fumbling onto a connector, but no luck.

 

[garbled]

If you look around on amazon, or probably elsewhere, you can find barb fitting reducers. You need one that has the ID of RO tubing, and then the ID of whatever tubing you are using. Use a short piece of RO tubing to go in the fitting, then use the barb reducer to connect to your dosing line.

 

[Hasted]

If you look around on amazon, or probably elsewhere, you can find barb fitting reducers. You need one that has the ID of RO tubing, and then the ID of whatever tubing you are using. Use a short piece of RO tubing to go in the fitting, then use the barb reducer to connect to your dosing line.

So I would need a 1/4 to a barb to the tube that's "3mm ID x 5mm OD". Thanks. I will start digging for that specific connection.

 

[Hasted]

I THINK I found one! Thanks for directing me on the right path @Garb

Pushlock Tubing Adapter

This pushlock tubing adapter is useful for adapting soft nylon or silicone hose to a push lock (john guest) fitting. Useful to connect your ATO pump's output tubing to the 1/4" pushlock input of our kalk stirrer. The 3/16" x 1/4" adapter fits the tubing that comes with our ATO Diaphragm Pump...

www.avastmarine.com

Avast makes something that SHOULD work. I will update this once I try it out for those interested.

 

[Hooz]

I THINK I found one! Thanks for directing me on the right path @Garb

Pushlock Tubing Adapter

This pushlock tubing adapter is useful for adapting soft nylon or silicone hose to a push lock (john guest) fitting. Useful to connect your ATO pump's output tubing to the 1/4" pushlock input of our kalk stirrer. The 3/16" x 1/4" adapter fits the tubing that comes with our ATO Diaphragm Pump...

www.avastmarine.com

Avast makes something that SHOULD work. I will update this once I try it out for those interested.

Avast is out of stock. Anyone know who else carries these?

 

[scottj6]

Would this work? Push lock tubing adapter

 

[Spig]

Maybe put a short piece of RO tubing into the fitting and then you could attach something like this?

 

[Hooz]

Would this work? Push lock tubing adapter

It might!