WAV problems

[DiverDavid]

I relocated my APEX Saturday and in the process I had to move my WAV's from the EB832 to a 1link module. I have had problems with it ever since. I thought I had the problem solved yesterday by rebooting and removing the old configuration. It is showing on Fusion that they are functioning but they are not. Does anyone have any ideas?

Thanks in advance!

 

[Flippers4pups]

Bump

 

[vhuang168]

Where is the power supply for the 1Link module connected to?

 

[DiverDavid]

Where is the power supply for the 1Link module connected to?

It is plugged into a receptacle under my cabinet, not into the EB832. I did rectify the problem the WAV's are 35 W each, the power supply for the 1 Link is 100 W max. I am an electrical contractor and good design you don't load a circuit at more than 80% if there is a continuous load on it. I think this was the problem I had that the power supply was overloaded and in turn was shutting down. I relocated one of the WAV's back to the EB832 and it has been flawless since.