Wave Engine- running multiple repeat trigger within the hour?

[Bluedore]

Hi,
Does anyone know how to set up to run multiple repeat triggers with the hour? I setup 3 repeat triggers but seems to only run one of them. If anyone know how to set this up please share.

Thanks in advance!

 

[psl123]

interested and watching

 

[minus9]

Are they starting one after the other? Their start times should be consecutive or not overlap with one another. So the first one starts at 9:00, then the second at 9:20, then the third one at 9:40. Repeat triggers will only overwrite basic triggers, the only way to have repeat triggers run consecutive is based on how long they run with no overlap. At least, this is my understanding of the programming.

 

[Bluedore]

WE only run the longest duration time One of the 3 repeat trigger I put in, the other 2 didn’t get executed.

 

[minus9]

Can you take a screen shot of your triggers and post them here? My apologies, but I don't understand your response? How long is the trigger and how many internals?

 

[minus9]

So here's one repeating trigger that I use.
It runs for 15 minutes, five times a day, starting at 9am and runs every two hours.
If I wanted to have another repeating trigger run right after this one, the start time would be 9:15am or later.
Did you watch the vid on programming repeating triggers?
Programming Triggers

 

[Bluedore]

Great! That clarifies the missing piece, as I put all my starting at 8am. I’ll try put starting time differently to see if it’ll work. Thanks.

 

[minus9]

Great! That clarifies the missing piece, as I put all my starting at 8am. I’ll try put starting time differently to see if it’ll work. Thanks.

No problem. You can have them alternating between hours or whatever time you designate. It's a very simplified way of programming different flow patterns once you get the structure down. Good luck and let me know how it works out?