Wave Engine

Willy315 · Feb 25, 2020

Jeff@CoralVue said:
Hi, robbous! Sorry to hear about the trouble you are experiencing. I would suggest sending an email to [email protected] so that we can walk you through the steps to get your VorTechs working with the WaveEngine. Here is a video that may help you in the meantime!

I feel that there are a few details missing from those instructions.
On the options page you need to pay attention to what group your Ecoteh pumps are assigned to. Once you have them paired with the WE they will then follow the program of the group they are assigned to, and follow either the "SAME SIDE" pump or "OPPOSITE SIDE"pump depending on how you set the Ecotech in step 5. Hopefully that helps someone, it was a bit confusing at first.

robbous · Feb 26, 2020

Willy315 said:
I feel that there are a few details missing from those instructions.
On the options page you need to pay attention to what group your Ecoteh pumps are assigned to. Once you have them paired with the WE they will then follow the program of the group they are assigned to, and follow either the "SAME SIDE" pump or "OPPOSITE SIDE"pump depending on how you set the Ecotech in step 5. Hopefully that helps someone, it was a bit confusing at first.

Is it possible to make the vortechs the main pumps in the selected group and all the other pumps ( gyre 350’s and octopulse 4 ) will be the slaves? Or can the vortechs be in their own group by themselves and work independently from the other pumps that would be in the our own separate group?

Carlos@CoralVue · Feb 26, 2020

robbous said:
Is it possible to make the vortechs the main pumps in the selected group and all the other pumps ( gyre 350’s and octopulse 4 ) will be the slaves? Or can the vortechs be in their own group by themselves and work independently from the other pumps that would be in the our own separate group?

All pumps in a group are treated the same regardless of the brand. If you have a Gyre, OctoPulse 4 and a Vortech in "Group 1", then ALL pumps work together.

Vortech pumps are grouped ALL or NOTHING. What this means is that you can only pump Vortech pumps into a single group. You cannot split 2 Vortechs to Group 1 and the other two Vortechs to Group 2.

What this also means is that YOU CAN put all Vortechs in a separate Group by themselves and they will work together as one but separate from all other pumps in DIFFERENT groups.

robbous · Feb 27, 2020

Carlos@CoralVue said:
All pumps in a group are treated the same regardless of the brand. If you have a Gyre, OctoPulse 4 and a Vortech in "Group 1", then ALL pumps work together.

Vortech pumps are grouped ALL or NOTHING. What this means is that you can only pump Vortech pumps into a single group. You cannot split 2 Vortechs to Group 1 and the other two Vortechs to Group 2.

What this also means is that YOU CAN put all Vortechs in a separate Group by themselves and they will work together as one but separate from all other pumps in DIFFERENT groups.

The reason i asked was because when i had my MP60 paired to my WA and the two gyre 350's

robbous · Feb 27, 2020

Now I am getting this message from my Gyre Pumps and they don’t run I even tried deleting the pumps and creating presets and triggers again no luck

Carlos@CoralVue · Feb 27, 2020

robbous said:
Now I am getting this message from my Gyre Pumps and they don’t run I even tried deleting the pumps and creating presets and triggers again no luck

What pump models do you have?

robbous · Feb 27, 2020

Carlos@CoralVue said:
What pump models do you have?

Maxspect gyre 350'svtwo of them

Carlos@CoralVue · Feb 27, 2020

robbous said:
Maxspect gyre 350'svtwo of them

On the pump configuration screen, can you tell me what is your MIN and MAX speeds?

robbous · Feb 27, 2020

Here ya go

Carlos@CoralVue · Feb 27, 2020

Chang

robbous said:
Here ya go

OK, try changing the speeds to 95% max and 25% min. See if that helps.

robbous · Feb 27, 2020

Nope still
Locked I actually even tried it down at 88% and 25% still locked

Carlos@CoralVue · Feb 27, 2020

robbous said:
Nope still
Locked I actually even tried it down at 88% and 25% still locked

Please head over to https://support.coralvue.com or email us directly at [email protected] and we will help you there. Sorry about the inconvenience.

robbous · Feb 27, 2020

I’ll do it later in the day I’ve got to be places is there anything special I should put in the subject so that they’ll know it’s me and what my issue is?

Carlos@CoralVue · Feb 27, 2020

Nothing special. Just make sure you post the email address you are using to log in to the HYDROS app as well as your R2R username so we can tie this thread to your support ticket.

We will take care of the issue for you!

CoralWealth · Mar 28, 2020

Hello! I would like to buy a wave engine that will run some jebaos and gyre 150/250.

What all do I need to buy?

CoralVue_Marketing · Apr 10, 2020

Demmelition4 said:
Hello! I would like to buy a wave engine that will run some jebaos and gyre 150/250.

What all do I need to buy?

I know we answered this in another thread, but just so this one doesn't go unanswered...

You'll want the standard WaveEngine (unless you prefer the model with EcoTech Marine wireless support, that works, too):

item # is HDRS-WE

HYDROS WaveEngine

A single app controls a variety of different pumps from your mobile devices to access all the features you desire, without the need for multiple apps, individual controllers and bulky power supplies that require a “bird’s nest” of cables and wires.

www.coralvue.com

Next, you'll need one adapter cable for each of your 150/250 Gyre pumps:

HDRS-WE-230PA

HYDROS WaveEngine Direct Drive Pump Adapters

For many pumps the HYDROS WaveEngine connects directly to the pump head. This removes the clutter of the power brick and the control head for these pumps.

www.coralvue.com

You will need a 0-10V HYDROS cable:

HYDROS WaveEngine 0-10V Quad Cable

Control any pump via variable speed INPUT. Unlike other controllers that require intricate programming on pumps connected via 0-10V, the HYDROS WaveEngine allows 0-10V INPUT connected Pumps to take full advantage of all native flow modes and presets without complicated coding.

www.coralvue.com

For the Jebao pumps, you're going to need:

Jebao/Jecod Pump to Neptune Systems Apex Controller Linkage Adapter

Free Shipping on Everything, Rewards, Free Swag, Price Matching & Free Returns.

www.saltwateraquarium.com

+ a power supply (as seen in the video I've not yet posted)

HOW TO CONNECT JEBAO PUMPS TO HYDROS WAVEENGINE

Follow the instructions in the video I'll get posted here eventually
Then follow the instructions in in this video: https://www.coralvue.com/hydros-waveengine-0-10v-quad-cable

If you have any trouble after taking these steps, just shoot our support staff an email at [email protected] and they'll walk you through the steps.

kjbrooks71 · Apr 22, 2020

robbous said:
Now I am getting this message from my Gyre Pumps and they don’t run I even tried deleting the pumps and creating presets and triggers again no luck

Did you ever get this issue solved? I set mine up yesterday and i'm getting the same message for an Octo Pulse 4. Thanks in advance.