I have a wave maker and an auto top off that's a float switch I do not have a sump nor is it an all in one. Tank has a hob filter and internal skimmer. Wondering if someone has had this issue but figured a simple design for the autotop off to not be affected by the wave maker when set on actually making waves. Any ideas?
Wavemaker auto top off mod
- Thread starter cor4eyh
- Start date
- Tagged users None
Zero Nitrates
I love chalices
Bump.
pickupman66
5000 Club Member
Thats a very very hard call. Two ideas and unfortunately both involve use of a controller.
1. if you know your evap rate, you can always set a timer to have the ATO on for X minutes and then off for y minutes. MY ato runs for three and then cannot be kicked back on for 30. it usually fires on in 45 mins.
2. Stop your wave maker pumps for 30 seconds and let the wave flatten. then your ato can power on and it can get a better reading. during this period. (wow, I typed this and then realized it was pretty moronic.) ZUmmmm..... See idea #1.
lastly you could build a protected box for the float. with just enough holes in it to stabilize the water but not enough to allow much wave inside.
1. if you know your evap rate, you can always set a timer to have the ATO on for X minutes and then off for y minutes. MY ato runs for three and then cannot be kicked back on for 30. it usually fires on in 45 mins.
2. Stop your wave maker pumps for 30 seconds and let the wave flatten. then your ato can power on and it can get a better reading. during this period. (wow, I typed this and then realized it was pretty moronic.) ZUmmmm..... See idea #1.
lastly you could build a protected box for the float. with just enough holes in it to stabilize the water but not enough to allow much wave inside.
