Webcams are now supported on the GHL Connect app!

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

@kodo28 - Thanks, I will wait for the fix then try again :)
 
Hi,
i tried a Ubiquiti Unify G3 Flex in standalone mode and pictures work. you have to enable anonymous snapshot mode in the unifi g3flex webinterface. then you can add the camera to myghl with http://ipadress/snap.jpeg
i could not get video to work since i only have the option of an rtsp stream.
 
Any camera’s that are good and van be used in the water?

You have the TMC Reef Cam (same as the Icecap one) or the Zetlight which looks a little bigger.
 
dangit. The last time Ditto went and showed me how to do stuff the wife practically made me buy a P4.

Why do I think this is going to cost me money? :D

-
S


@Mortie31 - I will work on a step by step video on my one camera to show how I did it :)
 
Ok, so my writeup on how I connected my WYZE camera to GHL connect is HERE.

Hope it's helpful and let me know if you see anything I documented incorrectly.
Thanks for that, I used IP Camera Viewer Pro, but that basic outline helped immensely.
 
Sorry to bring this thread up again, but I'm wondering if folks with the Amcrest are still able to use the camera? I bought one to use as the webcam, and have it working, but have been unable to get either the website nor the GHL app to actually show the image. It seems like it is trying, but just stays black. I'm not thrilled with having to open a port to the camera to view outside our home so I'm wondering if there are other solutions that work?
 
I can confirm it works with my "V Starcam C24" camera.
 
Is it normal, that the webcam feature works 20% of the time, then it'll just stop displaying an image? I then remove, and readd and remove and readd, and blabla... And it just comes back to life after a couple iterations.

For example, I now had a working webcam, added another (without touching the working one), and when I've clicked on "save", the working one broke..
 
Nevermind, found out the issue. Which is just.. I can't even find words for it, especially in this price range..

So it works, because my browser caches the authentication data from another tab. As soon as I close that tab, it breaks the stream in the myGHL website.
What happens I guess, is that the browser connects directly to the camera (which makes sense tbf), hence the behaviour.
So to address this, I'd need a camera that doesn't have password protection, which is not possible with my current cameras - or if GHL would make it work with http://user:pass@camera/stream, like for example VLC does it.

Okay, but then there is the GHL Connect APP, which should work with html authentication. But it doesn't. Not sure what its problem is, maybe that the stream is on port :8080, and it wants the url in a format of http://blabla/stream instead of http://blabla:8080/stream, I don't know.

I just feel a bit disappointed, because my previous ($100) controller was able to do this & for over a grand I feel like I shouldn't be a beta-tester..
 
My works 100% of the time however you will need to pass the credentials into the string for auth. This is nothing to do with the Profilux - it is everything to do with your webcam I suspect.
 
My works 100% of the time however you will need to pass the credentials into the string for auth. This is nothing to do with the Profilux - it is everything to do with your webcam I suspect.
Well it depends on the point of view. My camera wants to do digest http authentication and uses a different port than standard. Not sure which breaks it. But any browser, even the free ones, I throw at it will open the stream. It’s a $70 camera. Actually two of them.
Now on the other hand, the profilux is a $1k controller (not like this has to do anything with the controller itself), and I think it is fair to expect it to be able to handle the camera the same way as the web browsers are able to. Frankly, it’s an afternoon job for a programmer to implement it from this point where they are.
 
Raising this thread back from the dead.

I have a Foscam R4M and I was very surprised to find that I cannot get this to work with my P4.

Has anyone got this working?
 
I’ve learned to use the cameras own app / webstream instead. It’s faster and more flexible than logging into ghl connect anyway.
 
I don’t understand what point you are trying to make. This is a feature that is offered and there should be a way to use that feature with a WebCam that is quite well-known.

If anyone has any guide to making this work, and particularly from GHL, then please let me know.
 
I don’t understand what point you are trying to make. This is a feature that is offered and there should be a way to use that feature with a WebCam that is quite well-known.

If anyone has any guide to making this work, and particularly from GHL, then please let me know.
Is it stated in any product specification / documentation of the Profilux that your camera is going to work with it?

That said, if your camera can do an anonymous mjpeg stream, or one with the auth info provided in the url, then it will work.
 
Is it stated in any product specification / documentation of the Profilux that your camera is going to work with it?
That sort of comment is perilously close to trolling. Calm down a little bit and just focus on being helpful. This is a friendly forum for the most part.

The information you linked to has already been tried as it's the first information that comes up with a search. The url command to set the stream type responds with the message that is supposed to confirm success but the stream cannot be retrieved.

It worked with the Neptune Apex and I wouldn't have thought it should be difficult for it to work with Profilux.
 

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 30 44.8%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 13.4%
  • No.

    Votes: 25 37.3%
  • Other (please explain).

    Votes: 3 4.5%
Back
Top