What adapter/diverter do I need for installing my RO/DI unit?

[Kompact]

Hi there,

Recently bought an RO/DI unit, but I'm struggling to figure out what adapter/diverter I need to buy as I'm not very plumbing-savvy. I need to find a way to connect my source tube to this ~25mm (1") faucet, while also allowing water to run through to my washing machine via the hose in the 3rd picture. What do you guys suggest? Thanks in advance

p.s. my RO/DI unit came with a 3/4" to RO/DI source tube adapter, if that's of any use

 

[Naso180!]

If u can find a metal pipe to fit the spicket u can use a saddle valve. Saddle valve are what I always use in hard lines. Brass are common and cheap. Any HD or Lowes.

 

[Kompact]

If u can find a metal pipe to fit the spicket u can use a saddle valve. Saddle valve are what I always use in hard lines. Brass are common and cheap. Any HD or Lowes.

Thanks for the tip! Heading to my hardware store today, so I'll keep an eye out.

 

[tharbin]

I would just use a Y-adapter for the washer and RODI unit.

The white hose at the bottom is coming from the spigot. The gray line off the Y-adapter to the right goes to the washing machine and the small black line off the left goes to the RODI. That way I can also shut off the washer or the RODI lines for maintenance individually.

 

[Reefer825]

Y adapter like mentioned. I picked this one up from the local hardware store. I had to use two due to the dryer needing to be hooked up as well.