What do I need for dimmable T5s?

[LC8Sumi]

I ended up getting the dimming to work, but removed the S&L break out box because it does not turn the lights OFF.

I’m pretty sure it would if it was wired up correctly. It works perfectly for me...

 

[bdare]

I’m pretty sure it would if it was wired up correctly. It works perfectly for me...

Pretty sure it won't. I submitted a ticket to GHL. They confirmed the S&L breakout box will always send power. You can't turn it all the way off unless the device is plugged into a controllable outlet on the controller. I ended up buying a
EVG-AP-2F-HIC and now it works.

 

[LC8Sumi]

Pretty sure it won't. I submitted a ticket to GHL. They confirmed the S&L breakout box will always send power. You can't turn it all the way off unless the device is plugged into a controllable outlet on the controller. I ended up buying a
EVG-AP-2F-HIC and now it works.

There are pins that are always powered ofcourse, like the 12V pins for example. But the potential between the 1-10V <-> GND pins can surely be 0. I’ll measure them tonight just to be sure I’m not writing nonsense

 

[LC8Sumi]

Maybe you’ve misunderstood eachother with GHL, because mine def. put’s out 0V, when that L-port is directed to do so...

Anyway.. you got it working, and that’s what matters at the end of the day

 

[bdare]

Here is what GHL support wrote. Maybe he was just mis-informed:
Hi,
actually the lowest dimming level is at 1 volt, where the power supply is operating at its minimum level.
To shutdown the fixture, you'd need to use a relais, which can be connected to the S&L BoB.
If want to avoid this extra work, the EVG-AP-2F-HIC is the better choice in my opinion.
---
Best regards / Mit freundlichen Grüßen,

MatthiasF

 

[LC8Sumi]

Here is what GHL support wrote. Maybe he was just mis-informed:
Hi,
actually the lowest dimming level is at 1 volt, where the power supply is operating at its minimum level.
To shutdown the fixture, you'd need to use a relais, which can be connected to the S&L BoB.
If want to avoid this extra work, the EVG-AP-2F-HIC is the better choice in my opinion.
---
Best regards / Mit freundlichen Grüßen,

MatthiasF

Interesting. Maybe they’ve added this feature since.

 

[bdare]

Would have had to have been very recent. That comment was posted in my ticket on October 21st.

 

[LC8Sumi]

I’ve bought mine 1.5weeks ago

 

[porter_painter]

With a dimmable ballast you still power it, and then send a second signal to tell it to dim. Therefore if you set the dim level to 0, the ballast is still being powered when using the breakout box, as the power supply is independent of the breakout box.

The EVG-AP-2F-HIC also manages the power supply to the ballast, so can know when the dimming is set to 0 and cut the power supply to the ballast accordingly.

 

[qnguyen]

I ended up getting the dimming to work, but removed the S&L break out box because it does not turn the lights OFF.

What did you end up doing? I need to do the same soon for my Giesemann Spectra. Thanks

 

[bdare]

What did you end up doing? I need to do the same soon for my Giesemann Spectra. Thanks

I ended up using the EVG-AP-2F-HIC . Works great.