That looks complicated. So you just need a cover for the front? That would be really easy but it night not look very good.Here is a picture of what it looks like. I got it on etsy. It is two pieces.
Is this what you are talking about? I need the measurements of the mounting holes (in millimeters). The design would have to be a lot different so that the plastic could support the weight of the light. Last, what is the ideal height off the water and how far do you want it to hang over the tank? It wouldn't be as adjustable as this version.
Never mind the person who made these is working on a cover. Thanks for your reply.
Is this what you are talking about? I need the measurements of the mounting holes (in millimeters). The design would have to be a lot different so that the plastic could support the weight of the light. Last, what is the ideal height off the water and how far do you want it to hang over the tank? It wouldn't be as adjustable as this version.
Are you looking for something like this?
www.thingiverse.com
Shoot me the exact measurements of your tank including the eurobrace and glass thickness. I also need your lights mounting holes and your ideal height/position.
This design replaces the standard Nero front cover. You remove the cover then toss the printed anemone guard on. It is important to be careful and make sure the 4 little tabs on the Nero align.
Nice, I can use this to get the mounting hole measurement. Did it fit well?Are you looking for something like this?
noopsyche k7 pro ii Mount by wadesims2000
Mount with a captive locknut for the noopsyche k7 pro ii.
I used this to hang mine above my tank.
Thanks, I love making these things. Sometimes it takes 5 minutes and other times I'm pulling my hair out because I can't get the design to work.
For your MP10 wet side cover, what was your reasoning for modeling this? What benefits/gains or anything at all were you looking to achieve?Hey Everyone,
I started a thread about designing some 3d models for R2R members (Christmas Thread Link). I ended up designing 6 projects and really enjoyed them. I decided to convert the Christmas thread into this one and keep the offer open to the Reef2reef community. Here is the Plan...
Once a week I am going to make something suggested by the Reef2Reef members in this thread. I am going to record the drawing, designing, printing, testing, and implementation of the design. After each project is completed (success or failure) I am going to make the designs available on Thingiverse and post a YouTube video. ( ISeaLive channel - Just Started)
My goals... First, I would like to challenge myself to think outside the box, get better at designing and creating awesome things. 2nd, I would like the community to hold me accountable because I am notorious for not finishing projects. I always get bored and move on to something else when the last project is 95% complete. Last, I would like to create a library of informative content and designs that can be used to help inspire other reefers to make awesome things.
If you end up using any of my designs please post pictures and videos in this thread. I will be using the pictures/videos you post in the videos that I make and post on Youtube.
Here are some of the projects that I created in the Christmas Thread.
Nero 3 anemone guard for @Matt Miller
Thingiverse Link https://www.thingiverse.com/thing:4695451
Camera mount for @TankCandy
Not available on Thingiverse yet because the design needs revision.
25 Watt Aqua Ultraviolet UV Sterilizer Holder for @dumpysauce
Thingiverse Link https://www.thingiverse.com/thing:4700825
Jegar heater holder for @Bepis
Not available on Thingiverse yet because the design needs revision.
Tunze nano controller holder & power strip cover for @Bepis
Not available on Thingiverse yet because the design needs revision.
EcoTech Marine MP10 wet side cover mod for myself.
Thingiverse Link https://www.thingiverse.com/thing:4709077
Motorized light cable real for @kenchilada
Thingiverse Link https://www.thingiverse.com/thing:4708754
I will start posting some videos later this month of the things created above.
What should I make next? Please post what you would like to see me make. It will help a ton if you include drawings, dimensions, and pictures. Before starting a design I have to have a full understanding of what I am creating and the objectives that it has to accomplish.
Happy Reefing,
ISeaLive
Haha, I was bored one night and figured I would give it a try. It probably has no benefit except giving the MP10 a slightly different look. I don't think the wetside of that pump has changed much since I got my first one like 12 years ago.
It worked really well.
I think I am going to start buying all these pumps on Amazon then returning them. Unless anyone in SoCal knows where I can get my hands on one. I'll take a crack at it.
