What have you made for your tank? (ANYTHING)

This: [video=youtube_share;6RI0FJV_oY0]http://youtu.be/6RI0FJV_oY0[/video]

and this: [video=youtube_share;pBLgeBpRGdo]http://youtu.be/pBLgeBpRGdo[/video]

Sorry teh one is super long, but the good stuff is scattered throughout it...
 
This: [video=youtube_share;6RI0FJV_oY0]http://youtu.be/6RI0FJV_oY0[/video]

and this: [video=youtube_share;pBLgeBpRGdo]http://youtu.be/pBLgeBpRGdo[/video]

Sorry teh one is super long, but the good stuff is scattered throughout it...

How often do you water change? Great video btw, nice setup!
 
I have a pretty good list: drilled tank, built internal overflow box and the acrylic bender I used to build it, stand, canopy, acrylic sump, ATO reservoir, fans/brackets and acrylic frag racks. I think that's everything.
 
I change the water in my 29g about 1 or 2 gallons every day to every other day... 3 days is the absolute longest I go without skimming the surface and removing at least 1 gallon of water and allowing the auto-top off to replace it (after switching sources btw)
 
diy

heres my diy canister filter for my smaller tank
 

Attachments

  • 20140516_094519.jpg
    20140516_094519.jpg
    86.1 KB · Views: 359
I change the water in my 29g about 1 or 2 gallons every day to every other day... 3 days is the absolute longest I go without skimming the surface and removing at least 1 gallon of water and allowing the auto-top off to replace it (after switching sources btw)

DO you run a sump or skimmer? I saw the carbon sock in the DT so I'm just wondering, it looks super clean and your corals seem happy too!
 
No skimmer, no sump, just surface skim whenever I do a water change... My Thor shrimp have babies every two weeks also... I put BBS eggs in the tank at night to feed corals
 
I made a Mandarin feeder. I place the brine shrimp in the top funnel and they fall ton the bottom and try to get out while the mandarins picks the off one by one.
uploadfromtaptalk1401417419476.jpg
uploadfromtaptalk1401417444425.jpg


uploadfromtaptalk1401417419476.jpg


uploadfromtaptalk1401417444425.jpg
 
My $5.00 internal overflow box...

I added a frag tank to my system and needed an internal overflow box. I'm not handy at acrylic, and one would have cost me like 50 bucks. So, I Frankensteined it. It's a piece of 4" PVC end cap. I cut off a side of it large enough to allow it to fit around a bulkhead, AND to allow me to insert and remove the bulkhead if needed... Cut grooves in it with an angle grinder. Glued it to the tank with E6000 adhesive...

image.jpg


image.jpg
 
Nice! can you send me a design drawing or something so I can make sure to copy it exactly as I need to do something like that...
 
I turned a wall mounted bookcase into a stand to fit my 75 then 90 gallon tank It houses a 30L refugium & all the other necessities underneath. In hindsight I wouldn't have installed it this way as theres no rear access to the tank...oh well!
 

Attachments

  • GEDC0411.jpg
    GEDC0411.jpg
    63.5 KB · Views: 311
Last edited by a moderator:
I have a DIY collection too.

Frag rack.

IMAG0391.jpg


Filter socks

P1010178.jpg


Live rock basket for sump.(cryptic zone).

IMAG0170.jpg


Vortech battery back up.

post_819_0_17617800_1357822147.jpg


ATS

P1010432.jpg


P1010185.jpg

LED Lighting system and controller.

imag0208t.jpg


P1010700.jpg


P1010712.jpg
 
some of these are for sure going on my to do list. These are some really great Ideas. I love DIY things.
 
I just made these LR pillar stands for my new tank I'm getting ready to build.
1/2 acrylic rod was $5 for a 6' section, couple bucks for acrylic panels from the scrap bin at my local plastic supplier, $6 for weldon #16
So for $13 I got 3 of these(one is already stacked w/ rock and in a holding bin)
I take a simple propane torch and slowly heat an area till it starts to bend, shape it, then I drill the flat acryilic and tie down w/ zip ties, then give a good amount of weldon #16 to bond.
Been doing this w/ all my tanks for years now, I live in earthquake land, so far my pillars have held up to some pretty good shakers!

 
Here's another lil DIY rig, I got caught w/ my pants down during our last power failure, no generator(we really should all have one, or at least battery backups of some kind)
Anyway, I rigged a scuba bottle to airline to at least oxygenate the tank(pic taken after power came back)
Yeah, it's a bit ghetto, and of course this trick will only apply to those that have a scuba bottle laying around(I know I always do!lol)
Hey, sometimes it's just gotta get you through the night though right?

 

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 32 45.7%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 12.9%
  • No.

    Votes: 26 37.1%
  • Other (please explain).

    Votes: 3 4.3%
Back
Top