What Skimmer Should I Use On My 120?

BenHyder

Active Member
View Badges
Joined
Jan 4, 2015
Messages
171
Reaction score
34
Location
Chattanooga, Tennessee
Rating - 0%
0   0   0
I'm wondering if a Reef Octopus Classic 150SSS 6" Internal Space Saving Protein Skimmer would do well on a heavily stocked 120 gallon tank. If not, than what would you guys recommend?
 
I recommend a downdraft etts or becket skimmer. Or just an ats.
 
I like my Bubble Magus curve 7.... I cleaned the cup on Tuesday;)
d8360fcfd488c9aadb51a866fe5b6187.jpg
 
Whatever you get, what you want in a skimmer is taller body and quality pump.

Reason:
Taller body allows more contact time with air bubbles, allowing it more time for organics to stick to it. Thus more waste removal.

Good pump. Without one that is consistant and lasts years, you womt have a skimmer anymore.

This is why I recommend etss downdraft or beckett.
 
Whatever you get, what you want in a skimmer is taller body and quality pump.

Reason:
Taller body allows more contact time with air bubbles, allowing it more time for organics to stick to it. Thus more waste removal.

Good pump. Without one that is consistant and lasts years, you womt have a skimmer anymore.

This is why I recommend etss downdraft or beckett.

I am going to respectfully dissagree. Technology has prevailed my good friend. We don't need tall towers or extended dwell times anymore

I mean, I sell these things so your going to get the ultra biased spiel, but a tremendous amount of teeny tiny bubbles, and compact, perfectly matched body and neck sizes make the Deltecs pretty hard to beat. Not to mention they are silent

There's two smaller models that would be an ideal fit on 120
 
I am going to respectfully dissagree. Technology has prevailed my good friend. We don't need tall towers or extended dwell times anymore

I mean, I sell these things so your going to get the ultra biased spiel, but a tremendous amount of teeny tiny bubbles, and compact, perfectly matched body and neck sizes make the Deltecs pretty hard to beat. Not to mention they are silent

There's two smaller models that would be an ideal fit on 120

I doubt a detec of the same size would beat an etss or beckett. These pumps on these skimmers move a lot more water and produce more air. However i give deltec praise for a lower wattage pump.

There is nothing super scientific about a skimmer. Choose wisely.
 
There are many many different options and opinions. What you need to determine is how much room you have...both the footprint of the skimmer and the height of it (including room to remove the cup without tipping it). Some of the skimmers out now are powered by DC pumps which in my opinion are the best...give a lot better control. Take a look at some of the new NYOS DC skimmers.
 
I use a RO classic 150 myself in my 125 with about 12 fish so far and works great. I empty my cup about every 4-5 days. In the future I would like to get a bigger one because I want more fish.
 
I agree with Cory, I'm selling my Deltic 1350 off my 120 gal after 4 months, I've replaced the skimmer with a Life Reef 30" running on a MAG 18. There is absolutely no comparison in the two products. Hands down the old school way of designing skimmers is the way to go.

IMO, technology has not prevailed. Whats prevailed is marketing dollars, hype and the proverbial Kool-Aid. The only looser seems to be the everyday hobbyist.

Cory said it best. "There is nothing super scientific about a skimmer. Choose wisely." Read up on the skimmers he's mentioned and the life reef. I think you may be surprised at the difference and how substantial it is, then decide whats best for your tank.
 
Thanks for all of the suggestions! I really wish I could get life reef skimmer but they are a little out of my price range. I am now thinking about a Reef Octopus SRO xp2000sss that is being sold here on Reef2Reef. What do you guys think?
 
Buy cheap, buy twice

I would just buy an algae turf scrubber. Skip the skimmer until you can get something worth it. And use carbon.
 
Also keep in mind that a Mag18 or even a Mag9 on the smaller pumps for the life reef will generate quite a bit of heat vs. the newer models of skimmers that use 25-45w pumps.
 
Before ats, after ats. Not my pic, but the same happend to my tank.
image.jpeg
 
Hi Ben - I love my Nyos 160 skimmer.

There is a guy on the http://www.marsh-reef.org/selling his very new Nyos for $300 asking price under the title "NYOS Quantum 160 Protein Skimmer 300"

I wrote this earlier this year:

I found the perfect skimmer (for me)…
The last time I was running a reef tank was over 15 years ago. I had a 55 gallon and a 120 gallon plumbed together sharing a 100 gallon Rubbermaid horse trough in the closet behind the wall and under the staircase. In that sump I ran an AquaC EV-180. It was the best skimmer I ever had – reliable, didn’t overflow and it was easy to clean. Really easy to clean in an open sump that is. It was noisy though and needed a big Magdrive pump.

Skimmer 1: About 8 months ago I reentered reef keeping. I started out with an AquaMaxx ConeS CO-2. It produced great foam but was hard for me to get it tuned with the limited one option Quick-Precise adjustment valve. Plus it would suddenly flood for no apparent reason. It had a great twist off cup though. I sold it.

Skimmer 2: I couldn’t remember that the brand I had 15 years ago was an AquaC – I thought maybe it was a LifeReef. Jeff, the owner of LifeReef, is a terrific guy to consult and there are many very reputable fans of his skimmers on the boards. I purchased an in sump SVS3-24 with an extra-large cup and later added an extension to make it an SVS3-30 since I wanted to extend my water bubble contact time. I ran it with a Sicce 5 pump. It produced some good foam but I found it really needed to be cleaned every day or so for optimum performance. It would flood on me sometimes too for no reason that I could figure out. My sump is under the display tank and it was difficult for me to remove the cup. I had to disconnect the venturi airline and pull the cup upward. I wasn’t fond of the rubber gasket that helps hold the cup in place. It was a big skimmer with a large footprint that wasn’t performing the way I thought it should. With a single gate valve for adjusting the water height, it would bounce up and down over time. I sold it.

I looked at other skimmers from cheap knockoffs with Chinese pumps to high end ATB and Bubble Kings. I didn’t want to spend $1,000 on a skimmer.

Skimmer 3: I researched the Nyos Quantum 160. Not much out there as far as reviews but Ecotech endorses the skimmers and provides support. Ecotech has a good reputation for customer service that I have experienced firsthand. So I picked up the 160, installed it in the sump and it was producing a nice foam within minutes. This was too good to be true – I was waiting for the flooding. It didn’t flood.

It’s been in place for over two months and I think it is the perfect skimmer for me. Here is what I like about it. The cup twists off easily. I dump it out and clean it every other day. I do it before my wife gets up so she doesn’t know I am cleaning it in the kitchen sink. I feed heavily and it’s producing a nice thick foam. I keep the water height right at the top of the neck below the cup. You can make gross water level adjustments with the standpipe and fine adjustments with a micro adjustment valve at the top of the standpipe. Air volume is adjustable too with another valve. After turning off the integrated pump and cleaning the cup I sometimes have to make a small water height adjustment which takes me about about 15 seconds and it starts making foam right away.

Initially the cup didn’t twist on and off easily but after a few days of use, it loosens up nicely. I also didn’t like the short tubing to connect from the air valve at the top of the skimmer to the air intake on the pump. It kept falling off because it was too short. They provide a second piece of tubing and a small glass tube to use for ozone. I ended up taking the second tube and connecting it with the small glass tube to the other tube so there was plenty of tubing now between the pump and the intake. The inside of my skimmer gets some crud in it over time. I picked up an OXO SoftWorks Bottle Brush from Target which makes it easy for me to swish out the inside of the skimmer body when it’s needed and when I am emptying the cup. The bottle brushes at Walmart were too stiff and I was concerned about scratching the acrylic.

I don’t see a lot folks talking about the Nyos skimmers so I was bit worried about long term support if they didn’t take off. Because of that I picked up a second pump from Ecotech. Plus that makes it easier for me to soak one pump and replace it with the spare without keeping the skimmer off line too long.

From my perspective, this is the perfect skimmer for me. I highly recommend it.
 

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 30 44.8%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 13.4%
  • No.

    Votes: 25 37.3%
  • Other (please explain).

    Votes: 3 4.5%
Back
Top