What solenoid valves do you use for 1/4" line?

  • Thread starter Thread starter BZOFIQ
  • Start date Start date
  • Tagged users None

BZOFIQ

5000 Club Member
View Badges
Joined
Jul 31, 2014
Messages
5,049
Reaction score
4,313
Location
NYC
Rating - 100%
9   0   0
Just wanted to know what solenoid water valve do you use for 1/4" RO tubing.

Generally looking for N/C (Normally Closed) that open up when energized. Does the type you use get hot when ON for prolonged periods of operations.

Please recommend something you've used or are currently using. Thanks in advance.
 
There is one specifically for the apex. It is NC.
 
Autotoppoff sells them. Yes, they do get hot/warm if ON for extended periods. I’m using the apex one to auto vent my CaRx. No issue yet, but the reviews are pretty brutal. Strange since Neptune isn’t making them themselves.
 
Last edited:
I think I found stuff that's rated at 100% duty cycle.



If anybody has experience with either, please post below.
 
I have used this Tunze 8555.200 from BRS for years on an auto top off. Couple bad reviews there but you can some more research, I find it flawless.
1571680589966.jpeg
 
I have used this Tunze 8555.200 from BRS for years on an auto top off. Couple bad reviews there but you can some more research, I find it flawless.
1571680589966.jpeg
Ki also have been using this 2 years and has worked great although it gets extremely hot
 
I bought these previously but they too get EXTREMELY hot when used for long ON cycles

1571682353964.png


At these prices, they'd probably be great for something with short (few minutes at a clip) cycles.
 
Dont tell my Neptune solenoid any of this. It has run for 2 years while making 60 gallons of RODI water 1 time per week and 45min each day to refill the ATO container.
 
For the last couple years, the Neptune solenoid has been a backup to their ATO kit. No complaints with the ATO kit or the solenoid.

Now to make DI water, in use for 5+ years, I use a NO and a NC valve to pressurize and vent the supply side of the RO unit with two 120v AC versions of valves similar to what BZOFIQ has listed above. Be very careful with these to insulate all connectors so you don't hurt yourself when working around them. The 120v version made is very easy to wire together and plug into one of the Neptune power strips. Based on the pressure gage of the RO unit, they still vent and pressurize just fine...no Idea if they leak...but, the RO unit does read 0 when not in use.
 

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 30 44.8%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 13.4%
  • No.

    Votes: 25 37.3%
  • Other (please explain).

    Votes: 3 4.5%
Back
Top