Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I'm months deep in research and haven't even setup the tank!Go much more slowly than you want to.
I'm months deep in research and haven't even setup the tank!
If you have limited time I'd watch the BRS/WWC Hybrid Method and the 5min guides as they have more recent info.Already watched the 52 weeks twice, going to give it one more go around.
When purchasing my tank to go with a 120gal over the 90gal.
Yeah but if you originally bought the 120 now you'd want a 180 ;Facepalm
Great info here. Thanks.1) Stability is key. Assuming you wont get precipitation, splitting one big dose into 2 half doses is better, or 4 quarter, or a calcium reactor slowly dripping.
2) Design the system around your life style. Do you travel a lot? If so, make an easier system to keep or be willing to shell out for automation for when you are not around. Do you work from home, never travel, prefer to do things yourself? A hand dosing setup may work very well.
3) Have spare water made in case of an emergency. Its better than having to wait hours for the rodi to produce what you need, and further hours for salt to mix.
4) Depending on where you live, coral availability may be slim. If you have some local hobbiest or a club, you can score good deals or more importantly, combine online orders for free shipping.
5) As someone who keeps multiple planted and reef tanks, you can make any tank as cheap or expensive, and as easy or difficult as you want.
6) Built in redundancy will lead to a higher chance of success. Everything that moves or changes states can fail; heater thermostats, return pumps, powerheads, dosing pumps. Its better to not leave mission critical life support to just one item.
7) Having backups to swap out failed equipment on hand can save your tank. If this means your using ecotech mp powerheads and cannot afford a spare, keep a jebao on hand to get you to the point where you can get a replacement. Not having flow in a tank for 2 days while you wait for a replacement pump is not an option for most systems. Not having a heater in the winter, IF your room gets cold, is not an option.
8) Purchase heaters based on room variance from tank temperature. I was amazed when I through a 25W heater on a 50 gallon system and it was almost enough when initially I had a 100W heater that fortunately failed off. Had it failed on, knowing what I know now, it would have fried the tank.
9) This should have been one. Let your tank talk to you. If your corals look great, keep doing what you are doing. Change for the sake of change is bad. If you have a coral that retracts when nitrates are too high or low, test and adjust. My monti caps start to fade a bit when mag is low. Honestly, I still test to confirm dosage, but its virtually unnecessary. Several corals can have these responses.
10) Some corals WILL NOT live in your tank. If one coral starts to go and everything else is doing amazing, do not make significant changes to your system. Now if its something like a scoly shrinking, target feeding it is not a major change.
11) If a stick dies, keep it in the tank for a while. You would be amazed at some of them coming back to life.
12) This tags on to others, but research the corals you plan to get and how they fail. Knowing how to deal with brown jelly disease before it happens can save a lot of coral and money. If you are going sticks, how do you deal with RTN, STN, bleaching, etc before it happens can be the difference between success and failure. In many ways, researching failure recovery is just as critical, if not more so, than researching success methods.
So far I have a DIY 29g sump, standard 75g tank, DIY stand, 4 bulb T5 setup with extra bulbs, Skimmer, Fluval marine 3.0 48", and a couple extra powerheads, Buckets of dry rock, crushed coral, and some other odds and ends. Just need to do the plumbing, Media in the sump, drill the tank, and get a return pump and an extra one.Watch out there is a whole industry out to get your $$. You really should just start out with a 40 breeder. Build yourself a nice mixing station with a BRS rodi unit. Change 5 gallons every 1-2 weeks (easy!). Test your water weekly and keep a journal/spreadsheet. You do not need a high-tech sump system or skimmer. You may not need a skimmer at all (ripoff alert!). You can dose manually to start out. Get a refractometer and calibration solution. Black box light is ok. Don't starve your livestock. Do get a simple controller at least for your heating. If you are dying to spend more money then I would suggest ... a par meter!
There, you are reefing.
Quarantine quarantine quarantine! Keep aiptasia, vermetid snails, bubble algae out of your tank at all costs. The time/effort/money you spend trying to fix the issue will significantly outweigh the effort you put into quarantining. AND you may never get rid of it completely once introduced!

