Which T5 bulbs for what channel? Your opinions please.

Mykesocalreef

Active Member
View Badges
Joined
May 9, 2014
Messages
472
Reaction score
387
Location
Southern California
Rating - 0%
0   0   0
I have an 8 bulb dimmable fixture from ATI. One channel has 2 bulbs and the other has 6. My bulbs areas follows:
2-actinic
4-blue plus
1-coral plus
1-purple plus
Supplemented with a reef brite led.
I’m debating on putting the 2 actinic on a single channel and the rest on the other. Or putting the coral and purple plus on their own channel and blues /actinic on the other.. what are the T5 users opinions on this? Thanks for your thoughts.
 
Two most common implementations would be as a dawn / dusk application or as a growth driver.

Dawn / dusk implementation:
Use one blue plus and one actinic. Two actinics might be okay also. Just depends on your reef brite LED type. If you have the deep blue type bar, use whatever blue T5 type bulbs that complement best with your LED, as i assume you will want to use that also in your dawn / dusk periods. Of course, you can run those two bulbs for your full photo period, especially if you really like the way all 8 bulbs blend together.

Growth implementation:
Another option depends on what your preferred bulb combination is. For instance, if you really prefer the look of 6 bulbs where say only the purple plus is being used with your blue and actinic bulbs, then you can use that 6 bulb combo to run all the time. Use the other two bulbs to kick on for extra par and growth during times you don't see the tank. Some people do this but use daylight bulbs they might not normally use because they are too "white" for their taste (like 6500K, 10K, or an aquablue special type bulb). You might only need to run those 2 daylight bulbs for 2 to 4 hours a day but they will give you great growth and full spectrum coverage (and you might get 2 full years on those 2 bulbs before needing to replace them). Of course, you don't have to use daylight type bulbs and can use whatever 2 bulbs you like the least or aren't part of your preferred 6 bulb setup
 
Two most common implementations would be as a dawn / dusk application or as a growth driver.

Dawn / dusk implementation:
Use one blue plus and one actinic. Two actinics might be okay also. Just depends on your reef brite LED type. If you have the deep blue type bar, use whatever blue T5 type bulbs that complement best with your LED, as i assume you will want to use that also in your dawn / dusk periods. Of course, you can run those two bulbs for your full photo period, especially if you really like the way all 8 bulbs blend together.

Growth implementation:
Another option depends on what your preferred bulb combination is. For instance, if you really prefer the look of 6 bulbs where say only the purple plus is being used with your blue and actinic bulbs, then you can use that 6 bulb combo to run all the time. Use the other two bulbs to kick on for extra par and growth during times you don't see the tank. Some people do this but use daylight bulbs they might not normally use because they are too "white" for their taste (like 6500K, 10K, or an aquablue special type bulb). You might only need to run those 2 daylight bulbs for 2 to 4 hours a day but they will give you great growth and full spectrum coverage (and you might get 2 full years on those 2 bulbs before needing to replace them). Of course, you don't have to use daylight type bulbs and can use whatever 2 bulbs you like the least or aren't part of your preferred 6 bulb setup

Great answer! I think option 1 of this is by far the most common.

I for one hate the "windex" tank so I would never use option 2.
 

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 30 44.8%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 13.4%
  • No.

    Votes: 25 37.3%
  • Other (please explain).

    Votes: 3 4.5%
Back
Top