Worried if the Seam is Damaged! Need help

[brandon429]

on page one of the sand rinse thread are loss examples from dealing in unrinsed sand, any degree, transfer none. You would not want to risk that reef tank to a transfer method that didn't prior show up as a 60 page link of work. that's a really serious transfer job there man.

any variance to the steps listed risks the system.

 

[SimbaAnto]

on page one of the sand rinse thread are loss examples from dealing in unrinsed sand, any degree, transfer none. You would not want to risk that reef tank to a transfer method that didn't prior show up as a 60 page link of work. that's a really serious transfer job there man.

any variance to the steps listed risks the system.

Thank you so much . That well written steps and will follow this diligently. Thank you again for guiding

 

[brandon429]

can you take pics for us pls we could really use them as guidance in future moves, total tank surgery is a big fun deal. it's going to feel strange when you're rinsing out that sand for hours on end but just keep on trucking it will clear.

the tank will look so clean upon reset, so shiny it will be just shocking, it should look devoid of water if the pre rinses were done right.

and in that muted light the corals will come out fast and that system will be 100% free of all organic waste, exactly like a mouth feels 20 mins after leaving the dentists office

and you can spot feed the corals in your new tank, take some time to direct feed them when polyps are out, with a little frozen entree or something to coax them back strong

as the light ramps back up they'll be strong on polyp extension/no color loss and it will all skip cycle as best as can be humanly predicted. can't wait to see outcome. subscribed for sure

 

[SimbaAnto]

Got the tank delivered today. But the delivery guy pushed a bit and the pallet holding the base broke.

Upon inspection, didn't see any damage luckily . But then looking closely, I see this in the ATO section. Not sure if this is silicone excess or crack.

Unfortunately couldn't touch it as it's deep . Checking with Algae barn.

 

[SimbaAnto]

Algae barn checked and said it's just a silicone excess. So all set and moving forward

 

[SimbaAnto]

Finally the day came and I moved everything in a day with no casualties.

Though had a issue with one of the door broken and working it out with Algae barn. But overall all good.

Had help from local LFS to move the tank and it was very heavy. Took almost 3 hours to complete the tank transfer.

Then about 4 hours to plug in critical equipment. Still going on but taking it slow. Wanted to do wire management better this time.

Thanks all

@brandon429
@vetteguy53081 @Reeferbadness @exnisstech @fishguy242 @Troylee


Day 1 - 5/28


Day 2 - 5/29

Today

 

[Troylee]

Finally the day came and I moved everything in a day with no casualties.

Though had a issue with one of the door broken and working it out with Algae barn. But overall all good.

Had help from local LFS to move the tank and it was very heavy. Took almost 3 hours to complete the tank transfer.

Then about 4 hours to plug in critical equipment. Still going on but taking it slow. Wanted to do wire management better this time.

Thanks all

@brandon429
@vetteguy53081 @Reeferbadness @exnisstech @fishguy242 @Troylee


Day 1 - 5/28


Day 2 - 5/29

Today

Awesome! It looks great!