WTS Three Day Old Bubble Magus NAC3

[Manners]

My sump wasn't well suited for this skimmer, and I couldn't get it adjusted right for me. I am just sticking with my Tunze 9002.

I had it in water for three days, and it was only turned on for maybe 5 minutes combined time. Perfect working condition, practically brand new. Can show order form date etc, was just last week.





Asking $130 shipped or local pick up, central florida located! PM is key.


Thanks a lot.

 

[ajskennes]

i wouldent think that was long enough to break it in, but GLWS

 

[eddiecorrea]

i wouldent think that was long enough to break it in, but GLWS

Exactly what I was thinking. You can't even get it close to adjusted in 5 minutes time. I recommend you spend 30 minutes or so. I'd bet you get it running an skimming like a monster.

 

[Dtech07]

It can take awhile for it to "Break-in" and the for the neck to build up a coat of film, the impeller to chop correctly. I would down a 10gallon water change take 4-5 (probably 4) gallons of the old water place the skimmer in it at 7-9" with a heat sucks on the inside and let it run I till it breaks in then ounces its skimming "Broke-in" place it in your sump. Oh the 6gallons of water keep and add a little daily to the bucket with the skimmer. This way your using water with organics in it and you'll get Skimmer Poo also. This is how I breaking my skimmers with disrupting my current system setup. IMHO

 

[Manners]

i wouldent think that was long enough to break it in, but GLWS

Exactly what I was thinking. You can't even get it close to adjusted in 5 minutes time. I recommend you spend 30 minutes or so. I'd bet you get it running an skimming like a monster.

It can take awhile for it to "Break-in" and the for the neck to build up a coat of film, the impeller to chop correctly. I would down a 10gallon water change take 4-5 (probably 4) gallons of the old water place the skimmer in it at 7-9" with a heat sucks on the inside and let it run I till it breaks in then ounces its skimming "Broke-in" place it in your sump. Oh the 6gallons of water keep and add a little daily to the bucket with the skimmer. This way your using water with organics in it and you'll get Skimmer Poo also. This is how I breaking my skimmers with disrupting my current system setup. IMHO

I started running it again last night, and it's just not easily adjustable.. plus it has the dreaded Bubble Magus "wobble". Which drives me crazy. When people say to have it 7-9" in the water, does that mean the skimmer should be that far OUT of the water, or it should be submerged that much?

 

[Dtech07]

From the bottom of the skimmer it should sit 7-9" in.

 

[Dtech07]

Sorry according to BM it's 8-10" not 7-9" water depth.

 

[Jrmiller]

100 shipped? if so ill take it right now.

 

[cet98]

I agree...it's way too soon to give up on that skimmer.
skimmers can takes days/weeks to break-in properly depending on your system.
you may want to give it a quick vinegar bath to remove any oil residue left behind from manufacturing.
I use a 1:1 ratio of fresh water and white vinegar and let it run overnight.

Also, if your system has a light bioload, it may take a while for the skimmer to build up its coating along the interior walls during the break-in period...

don't be so quick to sell it for a loss when you haven't given yourself enough time...

all the best
C

 

[dmcrete]

nac3+ ??? or is it a nac3?? let me know thanks!!

 

[Manners]

WTS Three Day Old Bubble Magus NAC3+

I agree...it's way too soon to give up on that skimmer.
skimmers can takes days/weeks to break-in properly depending on your system.
you may want to give it a quick vinegar bath to remove any oil residue left behind from manufacturing.
I use a 1:1 ratio of fresh water and white vinegar and let it run overnight.

Also, if your system has a light bioload, it may take a while for the skimmer to build up its coating along the interior walls during the break-in period...

don't be so quick to sell it for a loss when you haven't given yourself enough time...

all the best
C

nac3+ ??? or is it a nac3?? let me know thanks!!

NAC3+.

Also, I let it run for a few days, it is running correctly now. It still puts too many micro bubbles into my tank, so it's still for sale. My sump just isn't designed for a skimmer. I will have to just run a strong fuge. I really wanted a skimmer, but I don't think it's going to happen.

125 SHIPPED, BUMP!!!!

 

[Manners]

There has been some confusion on why there is no manual with something so new. I accidentally threw away the box and manual as I was moving into my new house. Attached is a picture of the order form with original date of purchase, and cost.



125 SHIPPED.

 

[Manners]

120 shipped

 

[Manners]

Willing to trade as well

Also willing to accept trades..

Acans
Zoanthids
Rare mushrooms
I want to get into SPS, but l like the FUZZY kind only.. I'm not quite sure what they're called, but I like LONG polyps.
Superman/Sunset Montipora
Anything else you think I may be interested in, feel free to throw offers out there!

 

[Manners]

Gone. Please close.