Wyze Cam V2 Tank Mount

Odysseys_Reef · Dec 27, 2020

Hello All!

I spent a little bit of time trying to find a Wyze Cam mount that would work for an aquarium but no dice. After a bit of engineering I came up with this design. This mount hangs on the lip of any rimless aquarium and allows your camera to be flush to the glass without causing an eyesore. I hope this will help anyone looking for a Wyze mounting solution. Below I have attached my thingeverse link so you may print it yourself! Happy Reefing!

Wyze Aquarium Mount by mrodyssey

This Wyze mount is designed to hang 7 inched down from the rim of your home aquarium so you can mount a Wyze cam v2 and monitor you tank away from home

www.thingiverse.com

Screen Shot 2020-12-27 at 2.50.18 PM.png

Yates273 · Dec 27, 2020

Would like to see hooked up on tank if you can

Odysseys_Reef · Dec 27, 2020

Jason Yahr said:
Would like to see hooked up on tank if you can

Woodneers · Dec 27, 2020

Think you can make this to support the pan/tilt version? Would be super cool if you could incorporate a spot for a filter lense! I use my camera to check on multiple things around the tank hence the reason I got the pan/tilt version.

Odysseys_Reef · Dec 28, 2020

Woodneers said:
Think you can make this to support the pan/tilt version? Would be super cool if you could incorporate a spot for a filter lense! I use my camera to check on multiple things around the tank hence the reason I got the pan/tilt version.

I don't currently own a Pan/Tilt model but I will take a look at some mounts on thingiverse and see if I can come up with something!

Woodneers · Dec 28, 2020

Odysseys_Reef said:
I don't currently own a Pan/Tilt model but I will take a look at some mounts on thingiverse and see if I can come up with something!

I can get you some exact measurements with calipers if needed. Here is what I currently see! A filter would be hugely beneficial.

Odysseys_Reef · Dec 28, 2020

Woodneers said:
Think you can make this to support the pan/tilt version? Would be super cool if you could incorporate a spot for a filter lense! I use my camera to check on multiple things around the tank hence the reason I got the pan/tilt version.

This Is what I came up with using another mount I found online. I will upload the files to Thingverse now.

Odysseys_Reef · Dec 28, 2020

Odysseys_Reef said:
This Is what I came up with using another mount I found online. I will upload the files to Thingverse now.

Wyze Pan Aquarium Mount by mrodyssey

This is an Untested Wyze Pan mount to hang on your home aquarium. this was designed by request, but never printed or tested as of yet.

www.thingiverse.com

Odysseys_Reef · Dec 28, 2020

Woodneers said:
I can get you some exact measurements with calipers if needed. Here is what I currently see! A filter would be hugely beneficial.

In terms Of designing a mount for a filter I would need to have a camera in hand as well as a filter to figure out what size and thread count I would need to make this idea come to life!

AnotherReefHobbyist · Dec 28, 2020

this is hugely awesome! I just got a wyze cam to have as an aquarium cam, and you can see half my room cause I had to place it so far away, sadly my tank is rimmed, but I am sure I can do a little design tinkering and make a rimmed model, if I do I will make sure to post it as a remix ( on thingiverse ) and give your credit