Your favorite tank cover companies

as for the clear view, how much was your total and what’s your layout as far as light mounts if you’d not mind sharing

The lid was $210 and then I added 2 cord slots on each side and one feeding door for $38 so total was $250
 
That’s for a reefer 350 and no light mounts cut out correct?

correct no lights as my lights are hanging. However, I got the higher priced model you can get a Red Sea reefer 350 starting at $140 plus your customization
 
correct no lights as my lights are hanging. However, I got the higher priced model you can get a Red Sea reefer 350 starting at $140 plus your customization
correct no lights as my lights are hanging. However, I got the higher priced model you can get a Red Sea reefer 350 starting at $140 plus your customization
That would put it in under the $200 which if that’s the case I am ok with it.
 
Here are the lead times

0A2F89C1-9C30-4ED0-9778-B99F3463B03C.jpeg
 
Wow If they speed things up, I think more people will go for it.

I agree I actually bought mine completely unaware they had such long leads times. I’d heard that safe top lids was slow so I went with clear view. My mistake I didn’t check in advance.
 
I agree I actually bought mine completely unaware they had such long leads times. I’d heard that safe top lids was slow so I went with clear view. My mistake I didn’t check in advance.
I got you.
 
Clearview lids is delaying orders that already on 50-60 days timeline. I got an email advising me that my order will be delayed 14 days roughly. I have been waiting for 2 months already.
I will suggest look for different company. Not Clearview lids.
 
safetoplids...

their lids are the ONLY ones that have ventilated rims... so you wont have condensation on your acrylic.
no one else does that.

If you are going to pay a premium - go with them.
I got two from them - and they are absolutely fantastic to deal with - with an excellent product that i am super happy with.
 
Safetop, Clearview and Octolids are the 3 choices I found.

I did a DYI from kit for small tank, cheap but not pretty. I now want a 3 section screen top for my 240 (6ft tank). It’s simple, and I could DYI, but I want feed door and cord cut outs.

Spending more than $300 (my rough estimates) hurts and I can barley justify (if DYI would be ridiculously cheaper); but it’s the 2-3 month wait that bothers me!

So many choices in the hobby, thanks for reviving this topic, and thanks to everyone for sharing their experiences (cost, time frames, quality, etc).
 
I've got the DD Jumpguard DIY on mine and have to say they are pretty stout and relatively affordable compared to the full blown polycarbonate lids. The only issue I've had is corrosion under the paint where I've cut the extrusion. So for my new build I'm going to figure out how to coat the end to avoid that.
 
I've just had a custom top laser cut and edges polished out of 8mm Perspex to fit around new light fitting only cost £30

Brighton & Hove Plastics ltd

42 Boundary Road
Hove
Brighton
East Sussex
BN3 4EF

CONTACT PHONE:
01273 421122

E-MAIL ADDRESS:
[email protected]
 
Home Depot! I am no way a DIY guy at all myself. I picked up a sheet that was 30x48 for about 74 dollars. They have many different thicknesses to choose from as well. I have a bowfront style tank so finding a lid was very difficult and I am not a real fan of egg crate....I just used a sharpie and a hand saw then sanded down the edges it took me about an hr to complete.

31147E65-898D-4808-B83E-C84629A77886.jpeg
 

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 30 44.8%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 13.4%
  • No.

    Votes: 25 37.3%
  • Other (please explain).

    Votes: 3 4.5%
Back
Top