Your source water TDS?
- Thread starter Cerberusfish
- Start date
- Tagged users None
Mrtakeoff53
Active Member
I live in the Florida Panhandle. Our water out of the tap is awful. It smells bad and I do not drink it. I tested the TDS one day...480 PPM!! After the filter on my fridge it’s still 140 PPM! Yuck! RODI unit does great and takes it down to 0!
Mrtakeoff53
Active Member
The first stage particle filter on my RODI is disgusting. It’s brown after I make 50 gallons of water right after I change it.
Cerberusfish
Active Member
- Joined
- Nov 7, 2019
- Messages
- 244
- Reaction score
- 111
Oh dear that's pretty gross. Have you asked your city for better water purification?
JoshH
Tank Status: Wet...ish, growing things....
I managed to start a poll a little while ago with the same topic....
www.reef2reef.com
So what's everyone's Tap TDS and how do you handle it?
Over the past little while I've been reading lots of threads on RODI selection questions and seen some responses here and there about some who have insanely high and insanely low TDS and pressure coming from there tap. And it really got me wondering how wide of a range there really is out there...
www.reef2reef.com
Cerberusfish
Active Member
- Joined
- Nov 7, 2019
- Messages
- 244
- Reaction score
- 111
Seems like at least the majority of people have decent water. I cast my vote on there as wellI managed to start a poll a little while ago with the same topic....
So what's everyone's Tap TDS and how do you handle it?
Over the past little while I've been reading lots of threads on RODI selection questions and seen some responses here and there about some who have insanely high and insanely low TDS and pressure coming from there tap. And it really got me wondering how wide of a range there really is out there...
Orem Utah, 250ppm from the tap. Pressure is about 65psi which is an issue with my large system so I only get about 95% rejection, the booster pump I'd need is more expensive than my unit so I make do, 12 out of membranes into dual resin canisters, going to be one big canister soon.
Last edited:
RobB'z Reef
2500 Club Member
Well water, about 230... Tastes great tho, no unpleasant smells or taste at all. Rodi takes it to zero.
Last edited:
160 milwaukee
Well water. This spring it was over 1300! It used to be 450. Now I’m curious so I’ll have to test it again. We have a heavy duty treatment system that uses salt so I suspect a lot of my TDS is softener salt. I tested it with my refractometer and it was at 5.
ETA: Just tested at 583. I was using a 4 stage RODI and it brought it to 0 when the water was at 450. When it went way up, I could only get it to 5. I added another DI canister to get it to 0.
ETA: Just tested at 583. I was using a 4 stage RODI and it brought it to 0 when the water was at 450. When it went way up, I could only get it to 5. I added another DI canister to get it to 0.
Last edited:
Something doesn’t seem right there - should have been lower coming out if everything was working properly. Maybe you need a new membrane or a better block for chloramines (if it’s city water).
Uncle99
10K Club member
It’s not the TDS count that means bad, it’s what makes up that TDS count, some good, some bad for reefs anyways. Since we can’t determine what’s good TDS and Bad, we remove everything and put back only what we need for reefs.
Toronto Canada, 145TDS.
Toronto Canada, 145TDS.
