4? 5? 6? 7!!??

Crabs McJones

I'm so shi-nay
View Badges
Joined
Jul 24, 2017
Messages
27,806
Reaction score
139,920
Location
Wisconsin
Rating - 0%
0   0   0
Curious as to how many stages everyone is running on their RO/DI unit.
After my little fiasco I'm running the best of the best with 7 stages.
Sediment
5 Micron Carbon Block
1 Micron Carbon Block
(2) 75GPD RO Membranes
Cation DI Resin
Anion DI Resin
Mixed Bed DI Resin

20191026_134045.jpg

But please share yours! :)
 
Last edited:
7 stage. Was running 5 stage, but was burning through DI resin like it was salt on my dad's potatoes. I still burn through Anion pretty quick (not as quick as mixed resin) but much cheaper than before. The upgrade will pay for itself in a year I calculated. I have not replaced the cation or the mixed since upgrade - approx 400 gallons worth. I've replaced the anion 2x. Before I had to replaced mixed resin alone every 100 gallons.

Both 5 and 7 gave me 0 TDS output by the way.

IMG_20190616_141452090.jpg
 
Last edited:
Would anyone be surprised that I don’t run RODI but just a water filter with 0 TDS? My tap runs at 10. I have a RODI system but after testing my water filter that I use for drinking water, I decided to stick with it. It occasionally jumps to 1-2 but I haven’t seen any negative so far.
 
Btw @Crabs McJones ~ have you fixed the GHA and cyano yet? I had cyano take out some corals. Once I got rid of it, magic. A friend of mine batted GHA and cyano and it killed his tank. Very few corals left.
I wiped it out with a reboot. It hasn't resurfaced as of yet.
 
Just using the BRS 4 stage. Probably going through more DI resin than I would with a beefier system, but I keep an extra cartridge on hand and change it when I get 1 TDS out. No problems in 2 1/2 years.
 
Curious as to how many stages everyone is running on their RO/DI unit.
After my little fiasco I'm running the best of the best with 7 stages.
Sediment
5 Micron Carbon Block
1 Micron Carbon Block
(2) 75GPD RO Membranes
Cation DI Resin
Anion DI Resin
Mixed Bed DI Resin

I'll edit in a pic later, thought I had one on my phone but I don't.
But please share yours! :)

Oh I know those aren't Spectrapure membranes, so maybe a close second to the best ;) :p :p :p

As for me I run

1 Micron Sediment
0.5 Micron Carbon
Dual 90GPD Spectrapure Select Plus Membranes
Cation DI
Anion DI
Mixed Bed

Takes my 240-270 TDS to 0-1 after membranes and 0 after all that lovely resin:)

20181130_193223.jpg


And a thread I made a while ago about others TDS and what systems they are using

 
Last edited:
I have Marine depot 4 stage. I also know it is time for new media.
ro2.jpg
 
4 stage buddy, but getting zero TDS


I would like a larger hard-fitted system but I have no basement
I have no basement (newer home) but utilize laundry room
 
Spectrapure MaxCap 90 w/manual flush - 5 stages

source water - 75tds
pressure from the tap - 85psi

- 0.5 micron sediment filter
- 0.5 micron carbon block
- 90 gpd Spectra Select 99% membrane
- 2 capillary flow restrictors
one trimmed for summer water temps
one trimmed for winter water temps
to produce a 4 to 1 waste to product water ratio
- MaxCap high capacity DI cartridge
- SilicaBuster high capacity DI cartridge
 
Last edited:

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 32 45.7%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 12.9%
  • No.

    Votes: 26 37.1%
  • Other (please explain).

    Votes: 3 4.3%
Back
Top