720 gallon Miami Build

I am not sure I agree with this statement, the seaswirls are rated for X amount of flow and when you add a penductor to outlet it will increase the flow inside the tank by taking in water from around the penductor. It will not increase the actual flow going through the seaswirl.
I'm at softball can't really talk back and forth but read this webpage down by where it says should I use sea swirls.
And I'm not saying u can or u can't u can do whatever u want and I'm sure it will work but If u have a pump that is being properly used for a penductor to get its full 5x10 times pressure not the other end of the spectrum it wouldn't work very long before blowing the o ring on the sea swirl. I wouldn't put enductors on my sea swirls there's no reason. Also if u want to look up sea swirls website they also say not to use it cause of the pressure.

http://www.kthsales.com/website/Misc/hello_salt_water_enthusiasts.htm
 
IMG_9271.JPG
Image1477155092.538745.jpg
Image1477155107.244163.jpg
Image1477155125.245326.jpg
 
Just finished going thru this entire post and I'm utterly speechless. Superb build!!

Thanks now we got through the ugly phase :-( water is on as well as rock, flow, and light! But the sand and LR from TB saltwater was on point. Definitely use him for the 220. Rock looks great. Got a starfish and a few hitch hikers. One freaked me a bit. I thought it was a tiny fish but it ended up a shrimp. I noticed by the way it swam. It moved in my hand and kinda made me think it's a tiny mantis which would really suck. Got some anemone crabs, a hairy crab who now lives with a large hermit in my sump. One major issue...... there always is! Lol. Have to do some alteration to the sump. The fuge area where I was going to put in the miracle mud has rows of glass on the bottom and the baffle would get clogged by mud and stop flow. Long story short we'll have empty the sump and physically take out each row of glass. Meanwhile we vacuumed the mud and it sits in a bucket lol. Got some pics.
 
I'm at softball can't really talk back and forth but read this webpage down by where it says should I use sea swirls.
And I'm not saying u can or u can't u can do whatever u want and I'm sure it will work but If u have a pump that is being properly used for a penductor to get its full 5x10 times pressure not the other end of the spectrum it wouldn't work very long before blowing the o ring on the sea swirl. I wouldn't put enductors on my sea swirls there's no reason. Also if u want to look up sea swirls website they also say not to use it cause of the pressure.

http://www.kthsales.com/website/Misc/hello_salt_water_enthusiasts.htm

Justin as promised. The bottom brace is 5 inch by 3/4. A few parts 4 inches by 3/4
 
IMG_1477195425.513243.jpg

Pedro is hyped. Let's start!
IMG_1477195467.734942.jpg

Too much rock
IMG_1477195496.093548.jpg

Oh oh gonna need some 90 elbows and wifey to the rescue
 

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 32 45.7%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 12.9%
  • No.

    Votes: 26 37.1%
  • Other (please explain).

    Votes: 3 4.3%
Back
Top