80° temp

mandi29221

Active Member
View Badges
Joined
Mar 4, 2013
Messages
375
Reaction score
202
Location
Seaford, De
Rating - 0%
0   0   0
So since my tank has been running it's been at 80°. I leave my cabinet open at night to cool off. But I'm trying to figure out how to drop the temp to 78° I have a jebao DC return pump. 2 aqua mars lights. reef octopus 110int . And my heater is at 74°. I have mp40wqd. I've tried everything. A fan etc. Help please it's not a emergency because everything on my tank is fine. But I wanna start actual corals now.
 
What temps do you keep your house at?

How are you measuring temperature?
 
Does it max out at 80, or does it go higher during the day w/ lights on? Easiest / safest way is to buy a chiller. If you can relocate your pumps external (skimmer, return, etc.) that will help reduce temp as well (but increase risk of water/flood in the house)
 
Yeah I do. Is that why I have a eel so it's very snug

Okay, that's probably the biggest reason why your tank is retaining heat.

Is the led fixture setting close to the glass top?

Your DC pump shouldn't produce much of any heat, as would you skimmer pump or MP40. Those just don't generate any heat.
 
Okay, that's probably the biggest reason why your tank is retaining heat.

Is the led fixture setting close to the glass top?

Your DC pump shouldn't produce much of any heat, as would you skimmer pump or MP40. Those just don't generate any heat.
Its 14inches off.
1555101054756~2.jpeg
 
Agree with @Flippers4pups , the top is probably the biggest reason. Can you install mesh tops, that way you can remove some heat thru evaporation. Then, if needed, you could install some axial fan motors to promote more evaporation.
 
Okay, that's probably the biggest reason why your tank is retaining heat.

Is the led fixture setting close to the glass top?

Your DC pump shouldn't produce much of any heat, as would you skimmer pump or MP40. Those just don't generate any heat.
So I looked into the DIY screen top on bulk reef supply. I have a issue I have hang on over flow and a return pipe....
20190412_163911.jpeg
 
Agree with @Flippers4pups , the top is probably the biggest reason. Can you install mesh tops, that way you can remove some heat thru evaporation. Then, if needed, you could install some axial fan motors to promote more evaporation.
The one I saw wouldnt fit because of my hang on overflow and return pipe
20190412_163911.jpeg
 
The one I saw wouldnt fit because of my hang on overflow and return pipe
20190412_163911.jpeg

I've done numerous DIY screen tops over the years, Including for my QT tanks. You can definitely do some for your tank, even with hang on equipment.

Back to the temp. Yes, 80 degrees isn't bad, though most of us prefer 78 degrees for a coral tank. Ambient temperature in your house also dictates how well your tank manages and regulates temp. So, this could be a issue during the summer months ahead of us here in the US. Glass tops definitely hold temp in.

Blowing air at the tank, sump helps.
 
I've done numerous DIY screen tops over the years, Including for my QT tanks. You can definitely do some for your tank, even with hang on equipment.

Back to the temp. Yes, 80 degrees isn't bad, though most of us prefer 78 degrees for a coral tank. Ambient temperature in your house also dictates how well your tank manages and regulates temp. So, this could be a issue during the summer months ahead of us here in the US. Glass tops definitely hold temp in.

Blowing air at the tank, sump helps.
We keep our house at 70. But in the summer it does not stay at 70. Sometimes even with the ac at a constant running my house can reach 90°. So I'm trying to get this under control
 

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 32 45.7%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 12.9%
  • No.

    Votes: 26 37.1%
  • Other (please explain).

    Votes: 3 4.3%
Back
Top