- Joined
- May 18, 2019
- Messages
- 26
- Reaction score
- 17
- What state or country do you live in
- Canada
Silly question but is there any way I can have my tank filled to the rim.
When I used to use Canister filters it wasn't an issue.
This tank (I've attached a picture) the 2 return lines on each end are slightly lower than the overflow box.
So currently with the tank filled and the sump at the proper operating level, the water line is at the overflow box.
Is there anything I can adjust to raise the water level to the rim, I am not a fan of seeing the waterline and missing those few inches from the top annoys me.
Do I reduce the drain flow, or increase the pump speed?
Thank you!
When I used to use Canister filters it wasn't an issue.
This tank (I've attached a picture) the 2 return lines on each end are slightly lower than the overflow box.
So currently with the tank filled and the sump at the proper operating level, the water line is at the overflow box.
Is there anything I can adjust to raise the water level to the rim, I am not a fan of seeing the waterline and missing those few inches from the top annoys me.
Do I reduce the drain flow, or increase the pump speed?
Thank you!




