Breadman03
Valuable Member
- Joined
- Jun 30, 2015
- Messages
- 2,250
- Reaction score
- 2,022
- Location
- Luzerne County, PA
- What state or country do you live in
- Pennsylvania
You could also cycle the pump what the heck an Apex with an OSC command.
Anyone using Kamoer pump to drive CA reactor?
- Thread starter DanConnor
- Start date
- Tagged users None
d2mini
5000 Club Member
I tried using my GHL doser to run my GEO reactor. It would run for about 9 mins on, then turn off for a minute or two. It would do this 150x per day.
I would end up with c02 build up in the reactor. Every day or two it would be built up and the pump would start chopping bubbles and become very noisy.
I'd have to shut down, shake the reactor and let the bubbles escape out the top with the effluent.
So I don't think the SpectraPure would work either if you can't leave it running 24/7. At least with Geo.
I would end up with c02 build up in the reactor. Every day or two it would be built up and the pump would start chopping bubbles and become very noisy.
I'd have to shut down, shake the reactor and let the bubbles escape out the top with the effluent.
So I don't think the SpectraPure would work either if you can't leave it running 24/7. At least with Geo.
AquamanE
Well-Known Member
- Joined
- Feb 19, 2010
- Messages
- 895
- Reaction score
- 194
- Location
- Miami
- What state or country do you live in
- Florida
I’ve had the Kaomer for over 2 years. I want a spare but can’t find. I have some friends that are using a single head Stenner pump for CaRx with good success. Those are industrial chemical pumps. I use the double head pump for Automatic water changes successfully for at least 4 years now.
