Con’s reef. 150g IM Int build

I got two in the sump. Was left over from a previous tank. I know what you’re thinking, serious overkill. Probably going to sell them and get some jebaos to help turn the sump over, and use the rest on some corals.
 
I got two in the sump. Was left over from a previous tank. I know what you’re thinking, serious overkill. Probably going to sell them and get some jebaos to help turn the sump over, and use the rest on some corals.

That’s not bad at all @Cuong ! I think holding on to them may be better Incase you end up adding a frag tank to your system latter ;)
 
Way ahead of you. Bought a nuvo fusion 25 lagoon for a frag/holding tank for new inhabitants. I have two different displays, so its only logical to incorporate a nice fragger to keep everything else in check. Should get it tomm.
Little update, got me a new fish

02D39869-7124-459F-BCB2-5701C8A22219.jpeg
 
Really clean build so far. I cant wait to watch it progress. I just ordered the same tank and it should be here in about 10 days. I really wish the tank had two returns bc 3/4 is pretty much limited to 800 gph at the most I believe. I hadn't even thought to switch the return to the 1" thanks for the idea.
 
Double post
 
Last edited:
I ended not running the 1" return. I wanted a cleaner looking sump so I just kept it simple. In fact the 3/4 is actually handling the load way better than I thought. I'm running my varios 8 at it's middle setting. Anymore flow than that would batter the corals on the bottom glass. That's with 1 return jet pointing down the back glass, and the other straight out front. With a longer tank, I would probably go with the 1" but due to the lagoon effect of this tank, 3/4" piping is borderline substantial IMO...

BTW congratz on the new tank... Bet you're itching to get it...
 
Last edited:
I got two in the sump. Was left over from a previous tank. I know what you’re thinking, serious overkill. Probably going to sell them and get some jebaos to help turn the sump over, and use the rest on some corals.
I’ll trade you a couple jebaos for those MP-10s :D awesome build! Definitely following along for this one
 
Thanks buddy, and yes itching is an understatement lol. More like no sleep for the next week excited. You are setting the bar high for all the 150 INT owners to follow. Cant wait to get mine wet but I'm gonna make sure this build isn't rushed and well thought out unlike all my others. BTW that gem tang is beautiful. I hope he is nice and slimy and ich free :)
 
So i think I found a fix for the small doors. I decided to move the support arm closer towards the middle of the tank. Rather than 3 barely usable doors, I now have 2 big useful openings and 1 semi-usable one. 2 out of 3 doors is a win in my book. I now get some light bleed at night through the seam, but the benefits far outweigh the cons. Hope this helps anyone else.

073D504B-183B-42E1-8268-A4B5F80BC43D.jpeg


On another note, I think i got too much chaeto!!!! This stuff is thick
23689E1B-1F1B-43DA-90F5-386C15B843A0.jpeg


B01ADE8D-4499-4C28-BE83-EB4BDDFE5C61.jpeg
 
Last edited:
nice man !!!! I was already thinking up the door modifications myself but I was just guessing until I have the stand in front of me. I really like your change and probably will be doing the same thing bc I dont feel like doing too much work modifying stuff.

Holy Smoke!!!! see what I did there. Seriously though what light do you have over that cheeto? kessil?
 
I just realized that took a little over a month to grow. I think I might be overfeeding my tank :) ... It's a Kessil 380ii with a lens reflector bought off a member on here.... He prints a 5" standard but will sell one with a shorter barrel, widening the spread. I got the 4" since my refugium is 19"x14" and about 14" deep. Keeps light spillage to a minimum in the sump, therefore less algae to scrape.
 
Last edited:
Awesome man really appreciate all the insight. I will def get that members name off you when I am at that point.

Your build is giving me a woody, keep the pictures coming so I dont get blue balls. I swear your thread is making me want my tank like yesterday.

I am emulating a lot that you are doing on your build and I hope you dont mind. I have some different colors in mind though .
 
Last edited:
Con when you get a chance can you measure distance from left side opening of the stand to left of center brace and also right side of center brace to end of right opening? TIA

Also if you had to guess could you move that center support closer to the right end or would it not work with how the doors are laid out? I'm considering asking Paul Chung if I can order another center brace and bumping them both out very close to the corner uprights to create one large opening in the middle and minimize deflection as much as possible.
 
The center support brace is flush with the back side of the door. If I move it any further to the right, it will rub the door. Besides, I'm pretty sure that you want the brace as close to the middle as possible. The opening is a bit over 2 feet now.
"
 
Yea your right I forgot the tank is 35" wide lol. That would be way too much deflection.
 
Got another new fish!!!!

E1F24CE7-AFF0-4FA0-A1BC-228BEBC435E6.jpeg

Dang nice. I am taking delivery of my tank today :). Let's hope the shipping company was gentle going from CA to CT and finally NY. Fingers crossed
 
My delivery guy almost dropped my tank off the liftage. Be careful cuz my heart dropped for a split second. I jumped to catch it like my 400lbs newborn fell out of someone’s arms. If i wasnt there it would fell.
 

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 30 44.8%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 13.4%
  • No.

    Votes: 25 37.3%
  • Other (please explain).

    Votes: 3 4.5%
Back
Top