Crack in bulk head threads on return.
- Thread starter Wick
- Start date
- Tagged users None
Flippers4pups
Fins up since 1993
It maybe okay. Is it glued in?
Sod Buster
Valuable Member
- Joined
- Jan 17, 2019
- Messages
- 1,379
- Reaction score
- 2,590
- Location
- Just outside wine & apple country
- What state or country do you live in
- New York
OP
OP
Wick
Well-Known Member
- Joined
- Feb 27, 2019
- Messages
- 752
- Reaction score
- 323
- Location
- New York
- What state or country do you live in
- New York
oh shoot! i have something like this too but i think its only for metalI would get a new bulkhead and some liquid teflon to put on the 90 you threaded in deep. The teflon dope might save you with the crack though right now.
Sod Buster
Valuable Member
- Joined
- Jan 17, 2019
- Messages
- 1,379
- Reaction score
- 2,590
- Location
- Just outside wine & apple country
- What state or country do you live in
- New York
Don't use that you have. This.
That is threaded, so it will not be in the fitting itself, just clogging up the gaps in the threads. Or get a slip bulkhead and glue it.
That is threaded, so it will not be in the fitting itself, just clogging up the gaps in the threads. Or get a slip bulkhead and glue it.
Mastiffsrule
Where ever you go, there you are, so be nice 2 you
The dope you have, it is for metal I think. Check the label. if the bulkhead on the return is threaded in it needs to be replaced.
Check this out. Explains all about pvc threaded.
http://www.lascofittings.com/threads
Check this out. Explains all about pvc threaded.
http://www.lascofittings.com/threads
Mastiffsrule
Where ever you go, there you are, so be nice 2 you
I highly suggest replace it. Best do it right now or possible have an emergency later. There Are several concerns here. The fitting will be under pressure as a return, the bulkhead is cracked, and it has thread tape which should not be used.
I used to think tape was ok too, but read the link to LASCO and it makes a great argument on why not to use tape, why it cracked, and how to do it right.
Just want to be sure we don’t wind up with water on th floor.
I used to think tape was ok too, but read the link to LASCO and it makes a great argument on why not to use tape, why it cracked, and how to do it right.
Just want to be sure we don’t wind up with water on th floor.
Mastiffsrule
Where ever you go, there you are, so be nice 2 you
Bulkheads from online vendors, also maybe local plumbing supplies stores. I once found 3/4 inch bulkhead at homedepot. But I think that was a stoking error
OP
OP
Wick
Well-Known Member
- Joined
- Feb 27, 2019
- Messages
- 752
- Reaction score
- 323
- Location
- New York
- What state or country do you live in
- New York
didnt even think about thisBulkheads from online vendors, also maybe local plumbing supplies stores. I once found 3/4 inch bulkhead at homedepot. But I think that was a stoking error
Orko
Active Member
- Joined
- Jul 22, 2018
- Messages
- 343
- Reaction score
- 580
- Location
- Colorado Springs Colorado
- What state or country do you live in
- Colorado
Al of the "dope" you have shown in pics never hardens and I would not use t on a an aquarium. The Teflon tape is a good try you could cut it shorter with dremmel however you take the chance of the threads getting messed up..
Mastiffsrule
Where ever you go, there you are, so be nice 2 you
I used this. The only thing is it is also a lubricant. LASCO says it should not have lubricant to avoid over tightening and cracking. I just was careful
