Custom Lid For Better Lighting

[washingtontoler]

I have a 36 gallon bowfront that I have had set up for awhile. I orginally just planned on keeping fish in it but the more that I have looked at corals, the more interested I become. The main issue is the hood that came with the tank has poor lighting. I want to build a custom lid for it for better lighting. I thought about building a plexiglass or acrylic lid, but I am not sure if it will interfere with the lighting in the tank. Any help would be much appreciated.

 

[T-J]

Is that a Biocube? They make retrofits for the lights.
Don't make a lid out of plexi/acrylic, as it will seal the tank tight and cause the temp to rise. It will also allow for condensation on the lid, which will impact lighting.

 

[washingtontoler]

Is that a Biocube? They make retrofits for the lights.
Don't make a lid out of plexi/acrylic, as it will seal the tank tight and cause the temp to rise. It will also allow for condensation on the lid, which will impact lighting.

No it is a topfin 36 gallon bowfront. Thanks for the tip though. I guess I will have to find a way to make one using screen.

 

[ZombieEngineer]

I would 3d print a cover for window screen and use the BRS clear mesh netting.

 

[ZombieEngineer]

This post has a link to someone who custom makes screen tops for a very high end look and also a very cheap method by essentially bending window screen.

Aquarium top (netting) on bowfront?

I have a bowfront 30 gallon and have researched eggcrate and the clear roofing material but have decided I want clear netting so It lets the most possible light through and circulates well. My question is, how would I install netting like this on my bowfront tank? I know people add the screen...

www.reef2reef.com