EcoTech Marine Launches Coral Lab Project.
- Thread starter RandoReefer
- Start date
- Tagged users None
Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)
- Joined
- Jan 19, 2015
- Messages
- 155
- Reaction score
- 60
- Location
- Kent, UK
- What state or country do you live in
- United Kingdom
Yes you may want to consider slowly increasing the power to compensate for the wide angle lenses. It's tough t know just how much without a PAR meter but at least a 15% increase over a few weeks should help.
david p.
Well-Known Member
i have been running this since release, i'm pretty happy with results of both .
one question i have, i used to run at 65% my G3pro, with the pre-program if i put 65% intensity, on graph it shows aroune 42% at peak (that's what i use)... do i need to leave intensity at 100% to have a peak at 65% during the day ? just want to make sure i get the most of it without burning my corals!
one question i have, i used to run at 65% my G3pro, with the pre-program if i put 65% intensity, on graph it shows aroune 42% at peak (that's what i use)... do i need to leave intensity at 100% to have a peak at 65% during the day ? just want to make sure i get the most of it without burning my corals!
Robink
2500 Club Member
What intensity are you running the Radions on and how long? I just switched to the PHX14 program yesterday, was previously using the radiant schedule at 45% and it came on at 9am and off at 8, moonlight til almost 10pm.
I have it on 50% now. Have sps, lots of zoas and a few lps.
I guess this schedule doesn't let you run the lunar schedule... It gave me the option but the lights go off completely at 8. :mad:
griff500
Well-Known Member
- Joined
- Jul 10, 2015
- Messages
- 644
- Reaction score
- 521
- Location
- Sevenoaks, Kent, UK
- What state or country do you live in
- United Kingdom
The schedule has already been updated. They have simply put the violet at the same level as the blues and UV and the warm white at the same level as the cool white.
cobraz
Zoo Hunter
Bump to see if some can answer this question ...i have been running this since release, i'm pretty happy with results of both .
one question i have, i used to run at 65% my G3pro, with the pre-program if i put 65% intensity, on graph it shows aroune 42% at peak (that's what i use)... do i need to leave intensity at 100% to have a peak at 65% during the day ? just want to make sure i get the most of it without burning my corals!
david p.
Well-Known Member
i'm still curious on how to interprete the graph!
Did the SPS AB+ program change for the G4s? Im playing around with it now....using the preset settings from coral lab, ill set my maximum intensity to 100%, and on the graph scale it still only goes up to 70%
http://imgur.com/a/mjIPv
http://imgur.com/a/mjIPv
m0jjen
Well-Known Member
- Joined
- May 24, 2016
- Messages
- 678
- Reaction score
- 428
- Location
- Sweden
- What state or country do you live in
- Other International
65% is the intensity of the program (Since the program isnt using all the channels equally it will never get to 100% usage of the unit(s) capacity.). 42% is the % of MAX power the unit can deliver. E.G all channels att 100% with intensity 100%.
Leslie Tabor
Valuable Member
- Joined
- Dec 8, 2015
- Messages
- 1,590
- Reaction score
- 3,290
- Location
- Glorious South East MN
- What state or country do you live in
- Minnesota
I am running this program and my moonlights run perfectly??...almost too well actually... All but 1 night of the month they are on until 6am then they go off until the program starts again at 9 am. I guess I dont KNOW if that is right, I was initially concerned about the lowlight all night but seems ok.
- Joined
- Jan 19, 2015
- Messages
- 155
- Reaction score
- 60
- Location
- Kent, UK
- What state or country do you live in
- United Kingdom
Someone has already answered the question around Total Power bar setting v Running power... Just to confirm they will always be different unless the colour bars are set to 100% then the Total Power bar will match the Running power %...
Moonlight could be being confused with the Lunar Cycle option. This has a max setting of 20% as far as I remember and works with ESL and your location on the planet. It should relate to the local Moon Phase. If you have a Dark moon you may not notice the lights a Full moon could see your lights running during the night at that max 20%...
Moonlights in the classic sense with regards to a single led being controllable isn't part of the Radion.
Hope that helps.
Ian.
Moonlight could be being confused with the Lunar Cycle option. This has a max setting of 20% as far as I remember and works with ESL and your location on the planet. It should relate to the local Moon Phase. If you have a Dark moon you may not notice the lights a Full moon could see your lights running during the night at that max 20%...
Moonlights in the classic sense with regards to a single led being controllable isn't part of the Radion.
Hope that helps.
Ian.
