Frag tank

[Mike628]

I would like to order everything by this weekend. So im try to hurry and get everything figured out

 

[cmcoker]

Where in Texas? This site has locations in dfw, austin, houston, San Antonio.

http://www.regal-plastics.com

 

[Salty0331]

If you don't have the proper tools to cut it can be tricky for first time.....you need table saw, blade for acrylic, router for edges.....scrap pieces to practice.......if you don't mind paying extra you can have them cut.....those dimensions shouldn't be too expensive.....

 

[Salty0331]

What do you plan on keeping?

 

[Mike628]

I live in the DFW area

 

[Mike628]

My uncle has the tools.

 

[Mike628]

But how high should I make the tank? What is your recommendation?

 

[cmcoker]

I live in the DFW area

Regal plasttics, I linked to has a location in Irving.

Can also try,
Allied Plastic Supply, Inc.
10828 Shady Trail
Dallas, Tx 75220
214-350-3990

 

[Salty0331]

I would go 4" more in width and 24 inches high that should equal approx 45 gallons

 

[Mike628]

I wanted something small. But would 12 in wide 24 in long 6 in tall be ok?

 

[Mike628]

Regal plasttics, I linked to has a location in Irving.

Can also try,
Allied Plastic Supply, Inc.
10828 Shady Trail
Dallas, Tx 75220
214-350-3990

Thank you I will check that out tomorrow

 

[cmcoker]

I would see how big the sheets you want are and the cost.
Calculate a couple different heights, see if a certain height drastically increases or decreases costs. Like, 6in vs. 8in vs. 10in. More height will increase your water volume, probably make water more stable, unless you are plumbing to a display. Then it is just personal preference.

Do you have lights picked? That may influence your footprint as well

 

[Mike628]

No I do not have lights picked, but I want to use this one. https://jet.com/product/detail/8960...ug5xTZkxlffzfVDx-lCVqFzVupeA-IEmjcaAj3z8P8HAQ

 

[Mike628]

What do you plan on keeping?

I plan on keeping zoas, mushrooms, etc.

 

[Mike628]

Just what sizes would yall go? I want to try to keep it small. I really want 24in long about 12in wide and no deeper than 8in. But what size would yall make yalls?

 

[Mike628]

Use only cell cast acrylic, and Weldon 4 for adjoining the panels. Also have some Weldon 16 handy for any imperfections. Success is highly dependent of edge prep! Check out you tube plenty of great DIY videos. Look up "the King of DIY" he has a great series on acrylic tank construction. Good luck!

Do I use the weldon 4 or the weldon 16 to put the pannels together?

 

[Salty0331]

Use the 4 as the main cement, the 16 is thicker and used to fix gaps or imperfections in the seams.....

 

[Mike628]

So I would use the 4 to glue them together. Then use the 16 all the way around the seams to seal it all up?

 

[Mike628]

Is this stuff safe for fish and corals?

 

[Salty0331]

Once dry yes, those are the industry standard in acrylic aquariums