Free shipping on orders over $20 @ ParlAquatics.com

[Aspect]

Can you make this with a 1.5" male thread?

 

[Projects with Sam]

Looking to purchase 6 of these from you, can you PM me a cost for 6 and a timeline for you to produce them ?
I assume they are designed to fit XR30 G6 correct ?

I have just finalized my XR15 G6 version - I'll be putting it up on the site soon. The XR30 will be very similar. I mayneed to send you a sample to make sure it works out before sending you the rest.

XR30 rendering:

 

[Projects with Sam]

Sam,

The twist nut RO tube holder is great but I have 45x45 profile with 10mm nut requirement. Can you accommodate?

I can. I may need to send you a sample so we can be sure they fit.
Is this the profile spec?

Can you make this with a 1.5" male thread?

I have a deal with Cleven to print his Turbulent Flow Nozzles.
I may be able to scale one up but I don't have the capacity to custom design one as well as him.

 

[NormanB]

I went to the website, but didn't see the floss cups. No longer available?

Thanks

 

[Projects with Sam]

I went to the website, but didn't see the floss cups. No longer available?

Thanks

7" Filter Sock Cup - Filter Sock Replacement System

Filter Sock cup for 7" Filter Sock holders. Getting tired of dealing with those huge filter socks? Look no-further... There are two ways to get the perfect filtering replacement for felt or mesh filter socks: Complete: Use some filter floss. Use included template and cutout as many disks of...

parlaquatics.com

 

[NormanB]

Thanks so much. I looked right past that, I'd need a 4" cup.

 

[Projects with Sam]

Thanks so much. I looked right past that, I'd need a 4" cup.

I'm currently designing one! will be up soon.

 

[BZOFIQ]

I can. I may need to send you a sample so we can be sure they fit.
Is this the profile spec?

I have a deal with Cleven to print his Turbulent Flow Nozzles.
I may be able to scale one up but I don't have the capacity to custom design one as well as him.

Yes, 10mm slot.

The 45x45 and 45x90 are very popular profile for larger tanks, framing tech and others use this very profile for most of their stands.

Let me know if there is something you'd want me to try before listing it on the web.

 

[Projects with Sam]

Yes, 10mm slot.

The 45x45 and 45x90 are very popular profile for larger tanks, framing tech and others use this very profile for most of their stands.

Let me know if there is something you'd want me to try before listing it on the web.

Are you ok if I post the products so you can make your order and I'll get your address and Shopify's shipping discounts? I'll send samples for approval before making the rest of your order.

 

[Aaron75]

You ever sell or share your STL's? I would totally understand the reason for not doing so, just curious.

 

[Projects with Sam]

You ever sell or share your STL's? I would totally understand the reason for not doing so, just curious.

I have several up on thingiverse but stopped posting after I found a few of my models being used in ways I didn’t agree to.

 

[Projects with Sam]

Posted a bunch of new products!

Skimmer CO2 Scrubber Cap

3D printed skimmer cap to hold bags of soda lime to reduce CO2 in the skimmer air intake. The top cap has two 6.5mm O.D. tubes protruding from the rim. These tubes should be attached to the skimmer air input. If your skimmer is not listed, contact me and I can add it. This is still in...

parlaquatics.com

for the Aquamaxx Bullet 2 Hang-On Back Skimmer

4" Filter Sock Cup - Filter Sock Replacement System

Filter Sock cup for 4" Filter Sock holders. Getting tired of dealing with those huge filter socks? Look no-further... There are two ways to get the perfect filtering replacement for felt or mesh filter socks: Complete: Use some filter floss. Use included template and cutout as many disks of...

parlaquatics.com

EcoTech XR15 Light Shade Model 1

This light shade is designed for the XR15 aquarium light by EcoTech. It works on gen 3-6 XR15s. Its been tested on the Gen6 version but will also fit many other XR15 models.

parlaquatics.com

Twist nut for 4545 extrusion - 6mmTube (12 pack)

This small piece of plastic twists securely into 4545-style aluminum extrusion and allows 5.5 to 6.5mm aquarium airline tubes to be managed.This part, once twisted into place on the extrusion, can support four tubes and keep them well-organized while still leaving them visible. Strong PETG+...

parlaquatics.com

Twist nut for 4545 extrusion - 6mmTube Long (12 pack)

This small piece of plastic twists securely into 4545-style aluminum extrusion and allows 5.5 to 6.5mm aquarium airline tubes to be managed.This part, once twisted into place on the extrusion, can support four tubes and keep them well-organized while still leaving them visible. Strong PETG+...

parlaquatics.com

Twist nut for 4545 extrusion - Hook (12 pack)

This small piece of plastic twists securely into 4545-style aluminum extrusion and allows wires or similar to be cradled in-place.This part, once twisted into place on the extrusion, can support many wires and keep them relatively well-organized while still leaving them accessible. One-hand...

parlaquatics.com

Twist nut for 4545 extrusion - ZipTie (12 pack)

This small piece of plastic twists securely into 4545-style aluminum extrusion and allows wires or similar to be Zip-Tied in-place.This part, once twisted into place on the extrusion, can have up to two zip-ties securing things. One-hand operation for those tough to access places.Convenient...

parlaquatics.com

Twist nut for 3030 extrusion - 6mmTube Long(12 pack)

This small piece of plastic twists securely into 3030-style aluminum extrusion and allows 5.5 to 6.5mm aquarium airline tubes to be managed.This part, once twisted into place on the extrusion, can support four tubes and keep them well-organized while still leaving them visible. Strong PETG+...

parlaquatics.com

 

[BZOFIQ]

Are you ok if I post the products so you can make your order and I'll get your address and Shopify's shipping discounts? I'll send samples for approval before making the rest of your order.

Sure, let's do it.

 

[BZOFIQ]

Didnt see the post above - ordering later on today.

 

[ReeferMonkey]

how about a lightshade for 165 watt Viparspectras?

 

[ReeferMonkey]

have a lightshade design for Viparspectra 165 watts? would love a couple of some decent shades...

 

[Projects with Sam]

have a lightshade design for Viparspectra 165 watts? would love a couple of some decent shades...

Thanks for your interest!
I want to make shades for all the lights I can! I think the space is lacking some genuinely cool designs...
I just need physical lights to work on (or existing patterns).

For instance, I am sitting on 2 AI16 designs that I got sizes from the internets; I am just waiting to test the printed copy of one on a real fixture:

 

[aimed]

What about a shade for the Neptune gro light?

 

[Projects with Sam]

What about a shade for the Neptune gro light?

I don't have access to one to make the model from and test fit on. Didn't Printed Reef just come out with one?

 

[aimed]

I don't have access to one to make the model from and test fit on. Didn't Printed Reef just come out with one

I don't have access to one to make the model from and test fit on. Didn't Printed Reef just come out with one?

That’s where I saw it actually.