GHL KHD and SA Pump setting IP address for WiFi

[Mz. Fix It]

Another key thing I see is the OP said he set up the KHD as a slave... um.. that isn’t possible. The Doser can be set up as a slave and if it is a slave all the WIFI stuff in it turns off. You only set it to slave IF it’s connected to a Profilux. My guess is it’s not connected to a profilux.

So OP if you set something to slave undo that. Your doser isn’t a slave from what I can figure out.

I do not have the Profilux. I purchased the KHG and the SA pump so I do not have to have the Profilux. I would have been more than willing to purchase it if it would have eliminated all of these headaches getting this thing set up.

 

[AZMSGT]

I do not have the Profilux. I purchased the KHG and the SA pump so I do not have to have the Profilux. I would have been more than willing to purchase it if it would have eliminated all of these headaches getting this thing set up.

Allot of the software and interface is similar. If you look at the videos you might be able to piece the info from those to solve your problem.

 

[AZMSGT]

Also on your WIFI search look for ESP_xxxxx something.. the xxxx will be numbers or letters. That will be the GHL it doesn’t always come up as GHL

 

[williamch73]

So so the initial connect to the hotspot this video explains it quite well.


Now if you can not install a static IP and you need to determine the IP address or the unit download FING - network scanner it will scan the IP address that are on your wireless network and you will see the doser. If you need me to do a video let me know, done this a few times for some friends.

The hotspot should come up when the unit first powers up. About 15-20 seconds after you turn it on.

Hi!
If you are coneccted to the hotspot with the app, Can you control the doser when you are not home???